Commit Graph

351 Commits

Author SHA1 Message Date
Daniel F. Dickinson
88e0972a3c Fix a potential 'globbing' issue
Caught by ShellCheck

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
2020-01-16 10:31:49 -05:00
Andrew Pattison
f8f3d6fe93 capitalise Raspberry Pi 2020-01-08 12:01:12 +00:00
Andrew Pattison
f9375cdcec README.md - mention WPA_PASSWORD length requirement 2020-01-08 12:01:12 +00:00
Sam Tygier
9d334bee66 WPA_PASSWORD length check should only occur if set
Test if WPA_PASSWORD is set before check that it has a valid length.
2020-01-08 08:59:55 +00:00
Sam Tygier
024840034e Check WPA_PASSWORD length early
WPA_PASSWORD needs to be between 8 adn 63 characters. Check early
to avoid hitting error in stage2.
2020-01-07 08:07:48 +00:00
Sam Tygier
271177a0f7 Use tee with wpa_passphrase so errors are visable
wpa_passphrase writes its error messages to stdout, so this needs to
tee so that errors are visable to user. Also need to enable pipefail
so that the error code still gets caught.
2020-01-07 08:07:48 +00:00
Christian Decker
9d15c0f7d1 move picraft to stage where minecraft is installed (#362) 2019-12-12 10:15:17 +00:00
RaspberryPiFan
32353a162b Updated info about stage4 and stage5 (#359) 2019-12-09 11:57:26 +00:00
Christian Decker
18c3cebe94 configure unprotected wifi when WPA_PASSWORD is unset (#357) 2019-12-05 15:08:04 +00:00
RaspberryPiFan
8bdbbfb099 Added stage 5 to the text (#353) 2019-11-27 16:11:20 +00:00
RaspberryPiFan
d7c1ae21ca New types of images. (#352) 2019-11-26 15:49:49 +00:00
Leander
5456c3801f Explicitly check if postrun script exists in BASE_DIR (#351) 2019-11-26 15:03:47 +00:00
Leander
5e19033387 Remove accidental trailing brace (#348) 2019-11-18 14:38:54 +00:00
Leander
7f143a185e Export base directory before loading config file (#347) 2019-11-18 13:32:16 +00:00
snoe925
a449c75fac OS X does not have realpath (#342)
Check that realpath is present.  OS X doesn't have realpath.  The RPi builds on Docker for Mac if you increase the VM size. I am using 256G for my image.  See the Docker for Mac preferences.
2019-11-11 18:23:58 +00:00
Serge Schneider
95ba042c83 Add hostname to /etc/hosts 2019-11-06 14:33:07 +00:00
Rene Klootwijk
d30343f626 Added hostname parameter 2019-11-05 17:21:33 +00:00
Serge Schneider
19c0188798 Ensure debootstrap runs through 'sh' rather than 'bash'
This fixes #338 and fixes #294
2019-10-30 13:31:07 +00:00
Matthijs Kooijman
336ff2107e Document how to get values for the localization values 2019-10-14 10:55:10 +01:00
Serge Schneider
8026d9dc8f Update changelog 2019-10-14 10:54:20 +01:00
Serge Schneider
80d486687e Update release notes 2019-09-25 19:26:16 +01:00
Serge Schneider
5780006ecd Update release notes 2019-09-25 15:06:49 +01:00
Matthijs Kooijman
99f702f0ff Use parted for partitioning (#285)
Previously, fdisk was used by sending commands into its stdin, which is
not very robust (since it heavily relies on the interactive prompts
offered by fdisk as well as the default values it offers, which seem
prone to changing in future version).

It seems likely that in the past, fdisk was easier than parted since it
provides default values that make it easier to create adjacent
partitions, without precalculating all positions in the script. However
now that partitions are manually being aligned, all data must be
calculated anyway.

This commit changes the partition generation to use parted rather than
fdisk. For this, it rewrites various calculations and renames variables
to be easier to read as well. All values are now in number of bytes,
rather than mixing bytes and sectors.

This commit also makes makes sure that the boot partition and root
partition are always adjacent (previously the root partition was aligned
without also rounding the boot partition size, leaving some empty space
in between).

As a side effect of using parted, this also causes the "bootcode" part
of the MBR to be filled with some default x86 bootcode. This is totally
irrelevant for booting the Raspberry Pi, but it does prevent triggering
a bug in parted. When using parted to change the partition table (e.g.
when resizing the root partition on first boot by raspi-config's
init_resize.sh), the disk identifier would be changed due to this bug,
which would change the PARTUUID of all partitions. The init_resize.sh
script would work around this by updating the PARTUUID in e.g. fstab,
but that's fragile at best.  This commit prevents the bug from
triggering and keeps the disk identifier the same.

See https://debbugs.gnu.org/35714 for details about this parted bug.

This commit fixes #284.
2019-09-25 13:46:38 +01:00
Serge Schneider
946f164006 stage3: Mousepad used as simple text editor instead of leafpad 2019-09-24 15:57:09 +01:00
Serge Schneider
6538d5babf Update release notes 2019-09-23 15:30:02 +01:00
fpicalausa
652780757b Update config.txt to replace lirc-rpi with gpio-ir (#328)
The example for enabling IR transmission in `/boot/config.txt` is still using the deprecated `lirc-rpi` overlay. 
The documentation in `/boot/overlays/README` indicates that this overlay has been deprecated in favor of `gpio-ir` / `gpio-ir-tx`.

This updates the actual config.txt to suggest `gpio-ir` instead of `lirc-rpi`.
2019-09-23 10:11:58 +01:00
Serge Schneider
d1ed4a2982 Include rpi-eeprom 2019-09-18 14:53:35 +01:00
Russ Kubes
00c22ab57e Updated export-image to not depend on fake-hwclock and hardlink. (#326) 2019-08-27 18:16:24 +01:00
Serge Schneider
e8460beb3b Revert "export-image: Remove interfaces.dpkg-old"
This reverts commit a016561600.
2019-08-14 15:54:50 +01:00
Serge Schneider
77833ba929 cmdline.txt: remove dwc_otg.lpm_enable=0 2019-08-14 15:32:05 +01:00
Serge Schneider
c49261d756 stage2: install pciutils 2019-08-14 15:32:05 +01:00
Serge Schneider
a016561600 export-image: Remove interfaces.dpkg-old 2019-08-14 15:28:12 +01:00
Serge Schneider
c1ff2b1cac stage4: rename thonny package 2019-08-14 14:58:54 +01:00
Serge Schneider
28f344144c stage5: add scratch3 2019-08-14 14:58:54 +01:00
Joshua Bussdieker
d1f7a38905 Support regional config settings (#323) 2019-08-14 11:26:55 +01:00
Christophe Hurpeau
8110eb4891 Remove unused interfaces file (#322) 2019-08-11 16:50:11 +01:00
Kevin Stone
18b945ffb2 Moved git-hash determination to passed in build variable (#273) 2019-08-11 16:44:00 +01:00
Hugo Hromic
920e22bdc5 Ensure that the configuration file is an absolute path in Docker build (#306)
* Use `&&` instead of `;` in Docker pipeline

* In case of error, `&&` does not continue execution

* Silence shellcheck warning

* SC2086: Double quote to prevent globbing and word splitting.

* Ensure that the configuration file is an absolute path in Docker build

The specific problem is in commit 2ddd7c1, where the passed config file
(using the `-c` option) is now mounted inside the container using the
`--volume src:dest:opt` Docker option.

The problem is that Docker requires absolute paths for mounting single
files inside the container, otherwise it silently tries to mount a volume
name instead as an empty directory. Therefore the Docker build no longer
works with the following invocation forms (relative config-paths):

    ./build-docker.sh -c myconfig
    /path/to/build-docker.sh -c myconfig   # also doesn't work

This commit uses `realpath` (included in coreutils) in the Docker build
script to ensure that the passed configuration file is always an
absolute path before passing it to Docker.
2019-07-30 12:38:26 +01:00
Jens Hilligsøe
5436273ec7 Make build_docker.sh portable again (#308)
Last commit made the script break on macOS.

From `man sed` (On Linux):

```
       -E, -r, --regexp-extended

              use extended regular expressions in the script (for portability use POSIX -E).
```
2019-07-23 14:44:33 +01:00
132ikl
c0714e33d6 Update Stretch to Buster in README (#310) 2019-07-23 14:43:07 +01:00
Serge Schneider
9c0a25d852 stage2: add ntfs-3g 2019-07-18 12:07:45 +01:00
Serge Schneider
210b51c293 stage3: remove Epiphany 2019-07-10 15:47:17 +01:00
Serge Schneider
4c575d7e8f Add missing release notes 2019-07-10 15:42:40 +01:00
Serge Schneider
175dfb027f Update release notes 2019-07-08 19:52:00 +01:00
Serge Schneider
37482277d3 stage2: Add vl805fw 2019-07-08 19:42:09 +01:00
Serge Schneider
4118f8d524 stage5: Add Mathematica 2019-07-08 19:29:35 +01:00
gscscnd
1143530351 Revert "stage2: Add apt-transport-https" (#304)
This reverts commit 1806504983.

In Buster, APT has built‐in support for HTTPS repos (since version 1.5).
The ca-certificates package is already included in the modified file, so
this commit shouldn’t break anything.
2019-07-03 16:42:26 +01:00
gscscnd
fd21eff626 README.md shouldn’t be executable (#303)
In 667318116a, README.md’s file mode bits
were changed from 0o644 to 0o755. This commit reverts them back to
0o644.
2019-07-03 13:02:48 +01:00
Samuele Maci
ae4ec6445e build-docker.sh does not assume PWD=<repo root> (#302)
* bash variables in build-docker.sh are wrapped by curly brackets

* Ensure presence of config file while running build-docker.sh

* Do not assume that build-docker.sh is run from the repository root directory

* Mount config file in predictable location in docker container
2019-07-02 14:56:41 +01:00
Xerxes Rånby
57ef9b88e3 stage2/00-copies-and-fills/02-run.sh: Fix re-runs of script (#301)
Check that file exist before move.
2019-07-02 14:54:25 +01:00