Update release notes

Bash sets the HOSTNAME variable, overriding our default

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:stretch
+FROM debian:buster
 
 ENV DEBIAN_FRONTEND noninteractive
 
@@ -6,7 +6,7 @@ RUN apt-get -y update && \
     apt-get -y install \
         git vim parted \
         quilt coreutils qemu-user-static debootstrap zerofree zip dosfstools \
-        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file kmod\
+        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file kmod bc\
     && rm -rf /var/lib/apt/lists/*
 
 COPY . /pi-gen/

README.md

@@ -6,7 +6,7 @@ _Tool used to create the raspberrypi.org Raspbian images_
 ## Dependencies
 
 pi-gen runs on Debian based operating systems. Currently it is only supported on
-either Debian Stretch or Ubuntu Xenial and is known to have issues building on
+either Debian Buster or Ubuntu Xenial and is known to have issues building on
 earlier releases of these systems. On other Linux distributions it may be possible
 to use the Docker build described below.
 
@@ -14,7 +14,7 @@ To install the required dependencies for pi-gen you should run:
 
 ```bash
 apt-get install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
-dosfstools bsdtar libcap2-bin grep rsync xz-utils file git curl
+dosfstools bsdtar libcap2-bin grep rsync xz-utils file git curl bc
 ```
 
 The file `depends` contains a list of tools needed.  The format of this
@@ -62,7 +62,7 @@ The following environment variables are supported:
    be built and cached.  Note, `WORK_DIR` stores a complete copy of the target
    system for each build stage, amounting to tens of gigabytes in the case of
    Raspbian.
-   
+
    **CAUTION**: If your working directory is on an NTFS partition you probably won't be able to build. Make sure this is a proper Linux filesystem.
 
  * `DEPLOY_DIR`  (Default: `"$BASE_DIR/deploy"`)
@@ -78,6 +78,37 @@ The following environment variables are supported:
    Setting to '1' enables the QEMU mode - creating an image that can be mounted via QEMU for an emulated
    environment. These images include "-qemu" in the image file name.
 
+ * `LOCALE_DEFAULT` (Default: "en_GB.UTF-8" )
+
+   Default system locale.
+
+ * `TARGET_HOSTNAME` (Default: "raspberrypi" )
+
+   Setting the hostname to the specified value.
+
+ * `KEYBOARD_KEYMAP` (Default: "gb" )
+
+   Default keyboard keymap.
+
+   To get the current value from a running system, run `debconf-show
+   keyboard-configuration` and look at the
+   `keyboard-configuration/xkb-keymap` value.
+
+ * `KEYBOARD_LAYOUT` (Default: "English (UK)" )
+
+   Default keyboard layout.
+
+   To get the current value from a running system, run `debconf-show
+   keyboard-configuration` and look at the
+   `keyboard-configuration/variant` value.
+
+ * `TIMEZONE_DEFAULT` (Default: "Europe/London" )
+
+   Default keyboard layout.
+
+   To get the current value from a running system, look in
+   `/etc/timezone`.
+
  * `FIRST_USER_NAME` (Default: "pi" )
 
    Username for the first user
@@ -88,15 +119,15 @@ The following environment variables are supported:
 
  * `WPA_ESSID`, `WPA_PASSWORD` and `WPA_COUNTRY` (Default: unset)
 
-   If these are set, they are use to configure `wpa_supplicant.conf`, so that the raspberry pi can automatically connect to a wifi network on first boot.
+   If these are set, they are use to configure `wpa_supplicant.conf`, so that the Raspberry Pi can automatically connect to a wifi network on first boot. If `WPA_ESSID` is set and `WPA_PASSWORD` is unset an unprotected wifi network will be configured. If set, `WPA_PASSWORD` must be between 8 and 63 characters.
 
  * `ENABLE_SSH` (Default: `0`)
 
-   Setting to `1` will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you RaspberryPi.
+   Setting to `1` will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you Raspberry Pi.
 
  * `STAGE_LIST` (Default: `stage*`)
 
-    If set, then instead of working through the numeric stages in order, this list will be followed. For example setting to `stage0 stage1 mystage stage2` will run the contents of `mystage` before stage2. An absolute or relative path can be given for stages outside the pi-gen directory.
+    If set, then instead of working through the numeric stages in order, this list will be followed. For example setting to `"stage0 stage1 mystage stage2"` will run the contents of `mystage` before stage2. Note that quotes are needed around the list. An absolute or relative path can be given for stages outside the pi-gen directory.
 
 A simple example for building Raspbian:
 
@@ -246,14 +277,13 @@ maintenance and allows for more easy customization.
    enhancements, etc.  This is a base desktop system, with some development
    tools installed.
 
- - **Stage 4** - Raspbian system meant to fit on a 4GB card.  More development
+ - **Stage 4** - Normal Raspbian image. System meant to fit on a 4GB card. This is the
-   tools, an email client, learning tools like Scratch, specialized packages
+   stage that installs most things that make Raspbian friendly to new
-   like sonic-pi, system documentation, office productivity, etc.  This is the
+   users like system documentation.
-   stage that installs all of the things that make Raspbian friendly to new
-   users.
 
- - **Stage 5** - The official Raspbian Desktop image. Right now only adds
+ - **Stage 5** - The Raspbian Full image. More development
-   Mathematica.
+   tools, an email client, learning tools like Scratch, specialized packages
+   like sonic-pi, office productivity, etc.  
 
 ### Stage specification
 
@@ -261,7 +291,7 @@ If you wish to build up to a specified stage (such as building up to stage 2
 for a lite system), place an empty file named `SKIP` in each of the `./stage`
 directories you wish not to include.
 
-Then add an empty file named `SKIP_IMAGES` to `./stage4` (if building up to stage 2) or
+Then add an empty file named `SKIP_IMAGES` to `./stage4` and `./stage5` (if building up to stage 2) or
 to `./stage2` (if building a minimal system).
 
 ```bash
@@ -295,6 +325,9 @@ follows:
 
 # Troubleshooting
 
+## `64 Bit Systems`
+Please note there is currently an issue when compiling with a 64 Bit OS. See https://github.com/RPi-Distro/pi-gen/issues/271
+
 ## `binfmt_misc`
 
 Linux is able execute binaries from other architectures, meaning that it should be

build-docker.sh

@@ -1,35 +1,49 @@
-#!/bin/bash -e
+#!/bin/bash -eu
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
 
 BUILD_OPTS="$*"
 
 DOCKER="docker"
-set +e
+
-if ! $DOCKER ps >/dev/null 2>&1; then
+if ! ${DOCKER} ps >/dev/null 2>&1; then
 	DOCKER="sudo docker"
 fi
-if ! $DOCKER ps >/dev/null; then
+if ! ${DOCKER} ps >/dev/null; then
 	echo "error connecting to docker:"
-	$DOCKER ps
+	${DOCKER} ps
 	exit 1
 fi
-set -e
 
-if [ -f config ]; then
+CONFIG_FILE=""
-	source config
+if [ -f "${DIR}/config" ]; then
+	CONFIG_FILE="${DIR}/config"
 fi
 
 while getopts "c:" flag
 do
-	case "$flag" in
+	case "${flag}" in
 		c)
-			# shellcheck disable=SC1090
+			CONFIG_FILE="${OPTARG}"
-			source "$OPTARG"
 			;;
 		*)
 			;;
 	esac
 done
 
+# Ensure that the configuration file is an absolute path
+if test -x /usr/bin/realpath; then
+	CONFIG_FILE=$(realpath -s "$CONFIG_FILE")
+fi
+
+# Ensure that the confguration file is present
+if test -z "${CONFIG_FILE}"; then
+	echo "Configuration file need to be present in '${DIR}/config' or path passed as parameter"
+	exit 1
+else
+	# shellcheck disable=SC1090
+	source "${CONFIG_FILE}"
+fi
+
 CONTAINER_NAME=${CONTAINER_NAME:-pigen_work}
 CONTINUE=${CONTINUE:-0}
 PRESERVE_CONTAINER=${PRESERVE_CONTAINER:-0}
@@ -40,32 +54,42 @@ if [ -z "${IMG_NAME}" ]; then
 exit 1
 fi
 
-CONTAINER_EXISTS=$($DOCKER ps -a --filter name="$CONTAINER_NAME" -q)
+# Ensure the Git Hash is recorded before entering the docker container
-CONTAINER_RUNNING=$($DOCKER ps --filter name="$CONTAINER_NAME" -q)
+GIT_HASH=${GIT_HASH:-"$(git rev-parse HEAD)"}
-if [ "$CONTAINER_RUNNING" != "" ]; then
+
-	echo "The build is already running in container $CONTAINER_NAME. Aborting."
+CONTAINER_EXISTS=$(${DOCKER} ps -a --filter name="${CONTAINER_NAME}" -q)
+CONTAINER_RUNNING=$(${DOCKER} ps --filter name="${CONTAINER_NAME}" -q)
+if [ "${CONTAINER_RUNNING}" != "" ]; then
+	echo "The build is already running in container ${CONTAINER_NAME}. Aborting."
 	exit 1
 fi
-if [ "$CONTAINER_EXISTS" != "" ] && [ "$CONTINUE" != "1" ]; then
+if [ "${CONTAINER_EXISTS}" != "" ] && [ "${CONTINUE}" != "1" ]; then
-	echo "Container $CONTAINER_NAME already exists and you did not specify CONTINUE=1. Aborting."
+	echo "Container ${CONTAINER_NAME} already exists and you did not specify CONTINUE=1. Aborting."
 	echo "You can delete the existing container like this:"
-	echo "  $DOCKER rm -v $CONTAINER_NAME"
+	echo "  ${DOCKER} rm -v ${CONTAINER_NAME}"
 	exit 1
 fi
 
-$DOCKER build -t pi-gen .
+# Modify original build-options to allow config file to be mounted in the docker container
-if [ "$CONTAINER_EXISTS" != "" ]; then
+BUILD_OPTS="$(echo "${BUILD_OPTS:-}" | sed -E 's@\-c\s?([^ ]+)@-c /config@')"
-	trap 'echo "got CTRL+C... please wait 5s"; $DOCKER stop -t 5 ${CONTAINER_NAME}_cont' SIGINT SIGTERM
+
-	time $DOCKER run --rm --privileged \
+${DOCKER} build -t pi-gen "${DIR}"
+if [ "${CONTAINER_EXISTS}" != "" ]; then
+	trap 'echo "got CTRL+C... please wait 5s" && ${DOCKER} stop -t 5 ${CONTAINER_NAME}_cont' SIGINT SIGTERM
+	time ${DOCKER} run --rm --privileged \
+		--volume "${CONFIG_FILE}":/config:ro \
+		-e "GIT_HASH=${GIT_HASH}" \
 		--volumes-from="${CONTAINER_NAME}" --name "${CONTAINER_NAME}_cont" \
 		pi-gen \
 		bash -e -o pipefail -c "dpkg-reconfigure qemu-user-static &&
-	cd /pi-gen; ./build.sh ${BUILD_OPTS} ;
+	cd /pi-gen; ./build.sh ${BUILD_OPTS} &&
 	rsync -av work/*/build.log deploy/" &
 	wait "$!"
 else
-	trap 'echo "got CTRL+C... please wait 5s"; $DOCKER stop -t 5 ${CONTAINER_NAME}' SIGINT SIGTERM
+	trap 'echo "got CTRL+C... please wait 5s" && ${DOCKER} stop -t 5 ${CONTAINER_NAME}' SIGINT SIGTERM
-	time $DOCKER run --name "${CONTAINER_NAME}" --privileged \
+	time ${DOCKER} run --name "${CONTAINER_NAME}" --privileged \
+		--volume "${CONFIG_FILE}":/config:ro \
+		-e "GIT_HASH=${GIT_HASH}" \
 		pi-gen \
 		bash -e -o pipefail -c "dpkg-reconfigure qemu-user-static &&
 	cd /pi-gen; ./build.sh ${BUILD_OPTS} &&
@@ -73,12 +97,12 @@ else
 	wait "$!"
 fi
 echo "copying results from deploy/"
-$DOCKER cp "${CONTAINER_NAME}":/pi-gen/deploy .
+${DOCKER} cp "${CONTAINER_NAME}":/pi-gen/deploy .
 ls -lah deploy
 
 # cleanup
-if [ "$PRESERVE_CONTAINER" != "1" ]; then
+if [ "${PRESERVE_CONTAINER}" != "1" ]; then
-	$DOCKER rm -v "$CONTAINER_NAME"
+	${DOCKER} rm -v "${CONTAINER_NAME}"
 fi
 
 echo "Done! Your image(s) should be in deploy/"

build.sh

@@ -46,11 +46,11 @@ EOF
 			SUB_STAGE_QUILT_PATCH_DIR="$(basename "$SUB_STAGE_DIR")-pc"
 			mkdir -p "$SUB_STAGE_QUILT_PATCH_DIR"
 			ln -snf "$SUB_STAGE_QUILT_PATCH_DIR" .pc
+			quilt upgrade
 			if [ -e "${SUB_STAGE_DIR}/${i}-patches/EDIT" ]; then
 				echo "Dropping into bash to edit patches..."
 				bash
 			fi
-			quilt upgrade
 			RC=0
 			quilt push -a || RC=$?
 			case "$RC" in
@@ -122,6 +122,8 @@ if [ "$(id -u)" != "0" ]; then
 	exit 1
 fi
 
+BASE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+export BASE_DIR
 
 if [ -f config ]; then
 	# shellcheck disable=SC1091
@@ -154,13 +156,14 @@ export IMG_DATE="${IMG_DATE:-"$(date +%Y-%m-%d)"}"
 export IMG_FILENAME="${IMG_FILENAME:-"${IMG_DATE}-${IMG_NAME}"}"
 export ZIP_FILENAME="${ZIP_FILENAME:-"image_${IMG_DATE}-${IMG_NAME}"}"
 
-BASE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 export SCRIPT_DIR="${BASE_DIR}/scripts"
 export WORK_DIR="${WORK_DIR:-"${BASE_DIR}/work/${IMG_DATE}-${IMG_NAME}"}"
 export DEPLOY_DIR=${DEPLOY_DIR:-"${BASE_DIR}/deploy"}
 export DEPLOY_ZIP="${DEPLOY_ZIP:-1}"
 export LOG_FILE="${WORK_DIR}/build.log"
 
+export TARGET_HOSTNAME=${TARGET_HOSTNAME:-raspberrypi}
+
 export FIRST_USER_NAME=${FIRST_USER_NAME:-pi}
 export FIRST_USER_PASS=${FIRST_USER_PASS:-raspberry}
 export WPA_ESSID
@@ -168,7 +171,14 @@ export WPA_PASSWORD
 export WPA_COUNTRY
 export ENABLE_SSH="${ENABLE_SSH:-0}"
 
-export BASE_DIR
+export LOCALE_DEFAULT="${LOCALE_DEFAULT:-en_GB.UTF-8}"
+
+export KEYBOARD_KEYMAP="${KEYBOARD_KEYMAP:-gb}"
+export KEYBOARD_LAYOUT="${KEYBOARD_LAYOUT:-English (UK)}"
+
+export TIMEZONE_DEFAULT="${TIMEZONE_DEFAULT:-Europe/London}"
+
+export GIT_HASH=${GIT_HASH:-"$(git rev-parse HEAD)"}
 
 export CLEAN
 export IMG_NAME
@@ -197,18 +207,23 @@ source "${SCRIPT_DIR}/common"
 # shellcheck source=scripts/dependencies_check
 source "${SCRIPT_DIR}/dependencies_check"
 
+dependencies_check "${BASE_DIR}/depends"
+
 #check username is valid
 if [[ ! "$FIRST_USER_NAME" =~ ^[a-z][-a-z0-9_]*$ ]]; then
 	echo "Invalid FIRST_USER_NAME: $FIRST_USER_NAME"
 	exit 1
 fi
 
-if [[ -n "${APT_PROXY}" ]] && ! curl --silent ${APT_PROXY} >/dev/null ; then
+if [[ -n "${APT_PROXY}" ]] && ! curl --silent "${APT_PROXY}" >/dev/null ; then
-	echo "Could not reach APT_PROXY server:" ${APT_PROXY}
+	echo "Could not reach APT_PROXY server: ${APT_PROXY}"
 	exit 1
 fi
 
-dependencies_check "${BASE_DIR}/depends"
+if [[ -n "${WPA_PASSWORD}" && ${#WPA_PASSWORD} -lt 8 || ${#WPA_PASSWORD} -gt 63  ]] ; then
+	echo "WPA_PASSWORD" must be between 8 and 63 characters
+	exit 1
+fi
 
 mkdir -p "${WORK_DIR}"
 log "Begin ${BASE_DIR}"
@@ -237,7 +252,7 @@ for EXPORT_DIR in ${EXPORT_DIRS}; do
 	fi
 done
 
-if [ -x postrun.sh ]; then
+if [ -x ${BASE_DIR}/postrun.sh ]; then
 	log "Begin postrun.sh"
 	cd "${BASE_DIR}"
 	./postrun.sh

depends

@@ -16,3 +16,4 @@ xxd
 file
 git
 lsmod:kmod
+bc

export-image/00-allow-rerun/00-run.sh

@@ -3,3 +3,7 @@
 if [ ! -x "${ROOTFS_DIR}/usr/bin/qemu-arm-static" ]; then
 	cp /usr/bin/qemu-arm-static "${ROOTFS_DIR}/usr/bin/"
 fi
+
+if [ -e "${ROOTFS_DIR}/etc/ld.so.preload" ]; then
+	mv "${ROOTFS_DIR}/etc/ld.so.preload" "${ROOTFS_DIR}/etc/ld.so.preload.disabled"
+fi

export-image/01-set-sources/00-patches/0-sources.diff

@@ -1,9 +0,0 @@
-Index: export-jessie/rootfs/etc/apt/sources.list.d/raspi.list
-===================================================================
---- export-jessie.orig/rootfs/etc/apt/sources.list.d/raspi.list
-+++ export-jessie/rootfs/etc/apt/sources.list.d/raspi.list
-@@ -1,3 +1,3 @@
--deb http://archive.raspberrypi.org/debian/ stretch main ui staging
-+deb http://archive.raspberrypi.org/debian/ stretch main ui
- # Uncomment line below then 'apt-get update' to enable 'apt-get source'
- #deb-src http://archive.raspberrypi.org/debian/ stretch main ui

export-image/01-set-sources/00-patches/series

@@ -1 +0,0 @@
-0-sources.diff

export-image/04-finalise/01-run.sh

@@ -4,8 +4,12 @@ IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
 INFO_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.info"
 
 on_chroot << EOF
-/etc/init.d/fake-hwclock stop
+if [ -x /etc/init.d/fake-hwclock ]; then
-hardlink -t /usr/share/doc
+	/etc/init.d/fake-hwclock stop
+fi
+if hash hardlink 2>/dev/null; then
+	hardlink -t /usr/share/doc
+fi
 EOF
 
 if [ -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.config" ]; then
@@ -15,6 +19,14 @@ fi
 rm -f "${ROOTFS_DIR}/etc/apt/apt.conf.d/51cache"
 rm -f "${ROOTFS_DIR}/usr/bin/qemu-arm-static"
 
+if [ "${USE_QEMU}" != "1" ]; then
+	if [ -e "${ROOTFS_DIR}/etc/ld.so.preload.disabled" ]; then
+		mv "${ROOTFS_DIR}/etc/ld.so.preload.disabled" "${ROOTFS_DIR}/etc/ld.so.preload"
+	fi
+fi
+
+rm -f "${ROOTFS_DIR}/etc/network/interfaces.dpkg-old"
+
 rm -f "${ROOTFS_DIR}/etc/apt/sources.list~"
 rm -f "${ROOTFS_DIR}/etc/apt/trusted.gpg~"
 
@@ -43,24 +55,24 @@ rm -f "${ROOTFS_DIR}/etc/vnc/updateid"
 
 update_issue "$(basename "${EXPORT_DIR}")"
 install -m 644 "${ROOTFS_DIR}/etc/rpi-issue" "${ROOTFS_DIR}/boot/issue.txt"
-install files/LICENSE.oracle "${ROOTFS_DIR}/boot/"
-
 
 cp "$ROOTFS_DIR/etc/rpi-issue" "$INFO_FILE"
 
 
 {
-	firmware=$(zgrep "firmware as of" \
+	if [ -f "$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" ]; then
-		"$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" | \
+		firmware=$(zgrep "firmware as of" \
-		head -n1 | sed  -n 's|.* \([^ ]*\)$|\1|p')
+			"$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" | \
-	printf "\nFirmware: https://github.com/raspberrypi/firmware/tree/%s\n" "$firmware"
+			head -n1 | sed  -n 's|.* \([^ ]*\)$|\1|p')
+		printf "\nFirmware: https://github.com/raspberrypi/firmware/tree/%s\n" "$firmware"
 
-	kernel="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/git_hash")"
+		kernel="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/git_hash")"
-	printf "Kernel: https://github.com/raspberrypi/linux/tree/%s\n" "$kernel"
+		printf "Kernel: https://github.com/raspberrypi/linux/tree/%s\n" "$kernel"
 
-	uname="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/uname_string7")"
+		uname="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/uname_string7")"
+		printf "Uname string: %s\n" "$uname"
+	fi
 
-	printf "Uname string: %s\n" "$uname"
 	printf "\nPackages:\n"
 	dpkg -l --root "$ROOTFS_DIR"
 } >> "$INFO_FILE"

export-image/04-finalise/files/LICENSE.oracle

@@ -1,72 +0,0 @@
-Taken from http://www.java.com/license
-
-Oracle Binary Code License Agreement for the Java SE Platform Products and JavaFX
-
-ORACLE AMERICA, INC. ("ORACLE"), FOR AND ON BEHALF OF ITSELF AND ITS SUBSIDIARIES AND AFFILIATES UNDER COMMON CONTROL, IS WILLING TO LICENSE THE SOFTWARE TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS BINARY CODE LICENSE AGREEMENT AND SUPPLEMENTAL LICENSE TERMS (COLLECTIVELY "AGREEMENT"). PLEASE READ THE AGREEMENT CAREFULLY. BY SELECTING THE "ACCEPT LICENSE AGREEMENT" (OR THE EQUIVALENT) BUTTON AND/OR BY USING THE SOFTWARE YOU ACKNOWLEDGE THAT YOU HAVE READ THE TERMS AND AGREE TO THEM. IF YOU ARE AGREEING TO THESE TERMS ON BEHALF OF A COMPANY OR OTHER LEGAL ENTITY, YOU REPRESENT THAT YOU HAVE THE LEGAL AUTHORITY TO BIND THE LEGAL ENTITY TO THESE TERMS. IF YOU DO NOT HAVE SUCH AUTHORITY, OR IF YOU DO NOT WISH TO BE BOUND BY THE TERMS, THEN SELECT THE "DECLINE LICENSE AGREEMENT" (OR THE EQUIVALENT) BUTTON AND YOU MUST NOT USE THE SOFTWARE ON THIS SITE OR ANY OTHER MEDIA ON WHICH THE SOFTWARE IS CONTAINED.
-
-1. DEFINITIONS. "Software" means the software identified above in binary form that you selected for download, install or use (in the version You selected for download, install or use) from Oracle or its authorized licensees, any other machine readable materials (including, but not limited to, libraries, source files, header files, and data files), any updates or error corrections provided by Oracle, and any user manuals, programming guides and other documentation provided to you by Oracle under this Agreement. "General Purpose Desktop Computers and Servers" means computers, including desktop and laptop computers, or servers, used for general computing functions under end user control (such as but not specifically limited to email, general purpose Internet browsing, and office suite productivity tools). The use of Software in systems and solutions that provide dedicated functionality (other than as mentioned above) or designed for use in embedded or function-specific software applications, for example but not limited to: Software embedded in or bundled with industrial control systems, wireless mobile telephones, wireless handheld devices, kiosks, TV/STB, Blu-ray Disc devices, telematics and network control switching equipment, printers and storage management systems, and other related systems are excluded from this definition and not licensed under this Agreement. "Programs" means (a) Java technology applets and applications intended to run on the Java Platform, Standard Edition platform on Java-enabled General Purpose Desktop Computers and Servers; and (b) JavaFX technology applications intended to run on the JavaFX Runtime on JavaFX-enabled General Purpose Desktop Computers and Servers. “Commercial Features” means those features identified in Table 1-1 (Commercial Features In Java SE Product Editions) of the Java SE documentation accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html. “README File” means the README file for the Software accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html.
-
-2. LICENSE TO USE. Subject to the terms and conditions of this Agreement including, but not limited to, the Java Technology Restrictions of the Supplemental License Terms, Oracle grants you a non-exclusive, non-transferable, limited license without license fees to reproduce and use internally the Software complete and unmodified for the sole purpose of running Programs. THE LICENSE SET FORTH IN THIS SECTION 2 DOES NOT EXTEND TO THE COMMERCIAL FEATURES. YOUR RIGHTS AND OBLIGATIONS RELATED TO THE COMMERCIAL FEATURES ARE AS SET FORTH IN THE SUPPLEMENTAL TERMS ALONG WITH ADDITIONAL LICENSES FOR DEVELOPERS AND PUBLISHERS.
-
-3. RESTRICTIONS. Software is copyrighted. Title to Software and all associated intellectual property rights is retained by Oracle and/or its licensors. Unless enforcement is prohibited by applicable law, you may not modify, decompile, or reverse engineer Software. You acknowledge that the Software is developed for general use in a variety of information management applications; it is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use the Software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle disclaims any express or implied warranty of fitness for such uses. No right, title or interest in or to any trademark, service mark, logo or trade name of Oracle or its licensors is granted under this Agreement. Additional restrictions for developers and/or publishers licenses are set forth in the Supplemental License Terms.
-
-4. DISCLAIMER OF WARRANTY. THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. ORACLE FURTHER DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-
-5. LIMITATION OF LIABILITY. IN NO EVENT SHALL ORACLE BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF ORACLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ORACLE'S ENTIRE LIABILITY FOR DAMAGES HEREUNDER SHALL IN NO EVENT EXCEED ONE THOUSAND DOLLARS (U.S. $1,000).
-
-6. TERMINATION. This Agreement is effective until terminated. You may terminate this Agreement at any time by destroying all copies of Software. This Agreement will terminate immediately without notice from Oracle if you fail to comply with any provision of this Agreement. Either party may terminate this Agreement immediately should any Software become, or in either party's opinion be likely to become, the subject of a claim of infringement of any intellectual property right. Upon termination, you must destroy all copies of Software.
-
-7. EXPORT REGULATIONS. You agree that U.S. export control laws and other applicable export and import laws govern your use of the Software, including technical data; additional information can be found on Oracle's Global Trade Compliance web site (http://www.oracle.com/products/export). You agree that neither the Software nor any direct product thereof will be exported, directly, or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation.
-
-8. TRADEMARKS AND LOGOS. You acknowledge and agree as between you
-and Oracle that Oracle owns the ORACLE and JAVA trademarks and all ORACLE- and JAVA-related trademarks, service marks, logos and other brand
-designations ("Oracle Marks"), and you agree to comply with the Third
-Party Usage Guidelines for Oracle Trademarks currently located at
-http://www.oracle.com/us/legal/third-party-trademarks/index.html . Any use you make of the Oracle Marks inures to Oracle's benefit.
-
-9. U.S. GOVERNMENT LICENSE RIGHTS. If Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in Software and accompanying documentation shall be only those set forth in this Agreement.
-
-10. GOVERNING LAW. This agreement is governed by the substantive and procedural laws of California. You and Oracle agree to submit to the exclusive jurisdiction of, and venue in, the courts of San Francisco, or Santa Clara counties in California in any dispute arising out of or relating to this agreement.
-
-11. SEVERABILITY. If any provision of this Agreement is held to be unenforceable, this Agreement will remain in effect with the provision omitted, unless omission would frustrate the intent of the parties, in which case this Agreement will immediately terminate.
-
-12. INTEGRATION. This Agreement is the entire agreement between you and Oracle relating to its subject matter. It supersedes all prior or contemporaneous oral or written communications, proposals, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement. No modification of this Agreement will be binding, unless in writing and signed by an authorized representative of each party.
-
-SUPPLEMENTAL LICENSE TERMS
-
-These Supplemental License Terms add to or modify the terms of the Binary Code License Agreement. Capitalized terms not defined in these Supplemental Terms shall have the same meanings ascribed to them in the Binary Code License Agreement. These Supplemental Terms shall supersede any inconsistent or conflicting terms in the Binary Code License Agreement, or in any license contained within the Software.
-
-A. COMMERCIAL FEATURES. You may not use the Commercial Features for running Programs, Java applets or applications in your internal business operations or for any commercial or production purpose, or for any purpose other than as set forth in Sections B, C, D and E of these Supplemental Terms. If You want to use the Commercial Features for any purpose other than as permitted in this Agreement, You must obtain a separate license from Oracle.
-
-B. SOFTWARE INTERNAL USE FOR DEVELOPMENT LICENSE GRANT. Subject to the terms and conditions of this Agreement and restrictions and exceptions set forth in the README File incorporated herein by reference, including, but not limited to the Java Technology Restrictions of these Supplemental Terms, Oracle grants you a non-exclusive, non-transferable, limited license without fees to reproduce internally and use internally the Software complete and unmodified for the purpose of designing, developing, and testing your Programs.
-
-C. LICENSE TO DISTRIBUTE SOFTWARE. Subject to the terms and conditions of this Agreement and restrictions and exceptions set forth in the README File, including, but not limited to the Java Technology Restrictions and Limitations on Redistribution of these Supplemental Terms, Oracle grants you a non-exclusive, non-transferable, limited license without fees to reproduce and distribute the Software, provided that (i) you distribute the Software complete and unmodified and only bundled as part of, and for the sole purpose of running, your Programs, (ii) the Programs add significant and primary functionality to the Software, (iii) you do not distribute additional software intended to replace any component(s) of the Software, (iv) you do not remove or alter any proprietary legends or notices contained in the Software, (v) you only distribute the Software subject to a license agreement that: (a) is a complete, unmodified reproduction of this Agreement; or (b) protects Oracle's interests consistent with the terms contained in this Agreement and that includes the notice set forth in Section H, and (vi) you agree to defend and indemnify Oracle and its licensors from and against any damages, costs, liabilities, settlement amounts and/or expenses (including attorneys' fees) incurred in connection with any claim, lawsuit or action by any third party that arises or results from the use or distribution of any and all Programs and/or Software. The license set forth in this Section C does not extend to the Software identified in Section G.
-
-D. LICENSE TO DISTRIBUTE REDISTRIBUTABLES. Subject to the terms and conditions of this Agreement and restrictions and exceptions set forth in the README File, including but not limited to the Java Technology Restrictions and Limitations on Redistribution of these Supplemental Terms, Oracle grants you a non-exclusive, non-transferable, limited license without fees to reproduce and distribute those files specifically identified as redistributable in the README File ("Redistributables") provided that: (i) you distribute the Redistributables complete and unmodified, and only bundled as part of Programs, (ii) the Programs add significant and primary functionality to the Redistributables, (iii) you do not distribute additional software intended to supersede any component(s) of the Redistributables (unless otherwise specified in the applicable README File), (iv) you do not remove or alter any proprietary legends or notices contained in or on the Redistributables, (v) you only distribute the Redistributables pursuant to a license agreement that: (a) is a complete, unmodified reproduction of this Agreement; or (b) protects Oracle's interests consistent with the terms contained in the Agreement and includes the notice set forth in Section H, (vi) you agree to defend and indemnify Oracle and its licensors from and against any damages, costs, liabilities, settlement amounts and/or expenses (including attorneys' fees) incurred in connection with any claim, lawsuit or action by any third party that arises or results from the use or distribution of any and all Programs and/or Software. The license set forth in this Section D does not extend to the Software identified in Section G.
-
-E. DISTRIBUTION BY PUBLISHERS. This section pertains to your distribution of the JavaTM SE Development Kit Software (“JDK”) with your printed book or magazine (as those terms are commonly used in the industry) relating to Java technology ("Publication"). Subject to and conditioned upon your compliance with the restrictions and obligations contained in the Agreement, Oracle hereby grants to you a non-exclusive, nontransferable limited right to reproduce complete and unmodified copies of the JDK on electronic media (the "Media") for the sole purpose of inclusion and distribution with your Publication(s), subject to the following terms: (i) You may not distribute the JDK on a stand-alone basis; it must be distributed with your Publication(s); (ii) You are responsible for downloading the JDK from the applicable Oracle web site; (iii) You must refer to the JDK as JavaTM SE Development Kit; (iv) The JDK must be reproduced in its entirety and without any modification whatsoever (including with respect to all proprietary notices) and distributed with your Publication subject to a license agreement that is a complete, unmodified reproduction of this Agreement; (v) The Media label shall include the following information: “Copyright [YEAR], Oracle America, Inc. All rights reserved. Use is subject to license terms. ORACLE and JAVA trademarks and all ORACLE- and JAVA-related trademarks, service marks, logos and other brand designations are trademarks or registered trademarks of Oracle in the U.S. and other countries.” [YEAR] is the year of Oracle's release of the Software; the year information can typically be found in the Software’s “About” box or screen. This information must be placed on the Media label in such a manner as to only apply to the JDK; (vi) You must clearly identify the JDK as Oracle's product on the Media holder or Media label, and you may not state or imply that Oracle is responsible for any third-party software contained on the Media; (vii) You may not include any third party software on the Media which is intended to be a replacement or substitute for the JDK; (viii) You agree to defend and indemnify Oracle and its licensors from and against any damages, costs, liabilities, settlement amounts and/or expenses (including attorneys' fees) incurred in connection with any claim, lawsuit or action by any third party that arises or results from the use or distribution of the JDK and/or the Publication; ; and (ix) You shall provide Oracle with a written notice for each Publication; such notice shall include the following information: (1) title of Publication, (2) author(s), (3) date of Publication, and (4) ISBN or ISSN numbers. Such notice shall be sent to Oracle America, Inc., 500 Oracle Parkway, Redwood Shores, California 94065 U.S.A , Attention: General Counsel.
-
-F. JAVA TECHNOLOGY RESTRICTIONS. You may not create, modify, or change the behavior of, or authorize your licensees to create, modify, or change the behavior of, classes, interfaces, or subpackages that are in any way identified as "java", "javax", "sun", “oracle” or similar convention as specified by Oracle in any naming convention designation.
-
-G. LIMITATIONS ON REDISTRIBUTION. You may not redistribute or otherwise transfer patches, bug fixes or updates made available by Oracle through Oracle Premier Support, including those made available under Oracle's Java SE Support program.
-
-H. COMMERCIAL FEATURES NOTICE. For purpose of complying with Supplemental Term Section C.(v)(b) and D.(v)(b), your license agreement shall include the following notice, where the notice is displayed in a manner that anyone using the Software will see the notice:
-
-Use of the Commercial Features for any commercial or production purpose requires a separate license from Oracle. “Commercial Features” means those features identified Table 1-1 (Commercial Features In Java SE Product Editions) of the Java SE documentation accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html
-
- 
-
-I. SOURCE CODE. Software may contain source code that, unless expressly licensed for other purposes, is provided solely for reference purposes pursuant to the terms of this Agreement. Source code may not be redistributed unless expressly provided for in this Agreement.
-
-J. THIRD PARTY CODE. Additional copyright notices and license terms applicable to portions of the Software are set forth in the THIRDPARTYLICENSEREADME file accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html. In addition to any terms and conditions of any third party opensource/freeware license identified in the THIRDPARTYLICENSEREADME file, the disclaimer of warranty and limitation of liability provisions in paragraphs 4 and 5 of the Binary Code License Agreement shall apply to all Software in this distribution.
-
-K. TERMINATION FOR INFRINGEMENT. Either party may terminate this Agreement immediately should any Software become, or in either party's opinion be likely to become, the subject of a claim of infringement of any intellectual property right.
-
-L. INSTALLATION AND AUTO-UPDATE. The Software's installation and auto-update processes transmit a limited amount of data to Oracle (or its service provider) about those specific processes to help Oracle understand and optimize them. Oracle does not associate the data with personally identifiable information. You can find more information about the data Oracle collects as a result of your Software download at http://www.oracle.com/technetwork/java/javase/documentation/index.html.
-
-For inquiries please contact: Oracle America, Inc., 500 Oracle Parkway,
-
-Redwood Shores, California 94065, USA.
-
-Last updated 02 April 2013
-

export-image/prerun.sh

@@ -9,33 +9,28 @@ rm -f "${IMG_FILE}"
 rm -rf "${ROOTFS_DIR}"
 mkdir -p "${ROOTFS_DIR}"
 
-BOOT_SIZE=$(du --apparent-size -s "${EXPORT_ROOTFS_DIR}/boot" --block-size=1 | cut -f 1)
+BOOT_SIZE="$((256 * 1024 * 1024))"
-TOTAL_SIZE=$(du --apparent-size -s "${EXPORT_ROOTFS_DIR}" --exclude var/cache/apt/archives --block-size=1 | cut -f 1)
+ROOT_SIZE=$(du --apparent-size -s "${EXPORT_ROOTFS_DIR}" --exclude var/cache/apt/archives --exclude boot --block-size=1 | cut -f 1)
 
-ROUND_SIZE="$((4 * 1024 * 1024))"
+# All partition sizes and starts will be aligned to this size
-ROUNDED_ROOT_SECTOR=$(((2 * BOOT_SIZE + ROUND_SIZE) / ROUND_SIZE * ROUND_SIZE / 512 + 8192))
+ALIGN="$((4 * 1024 * 1024))"
-IMG_SIZE=$(((BOOT_SIZE + TOTAL_SIZE + (800 * 1024 * 1024) + ROUND_SIZE - 1) / ROUND_SIZE * ROUND_SIZE))
+# Add this much space to the calculated file size. This allows for
+# some overhead (since actual space usage is usually rounded up to the
+# filesystem block size) and gives some free space on the resulting
+# image.
+ROOT_MARGIN="$(echo "($ROOT_SIZE * 0.2 + 200 * 1024 * 1024) / 1" | bc)"
+
+BOOT_PART_START=$((ALIGN))
+BOOT_PART_SIZE=$(((BOOT_SIZE + ALIGN - 1) / ALIGN * ALIGN))
+ROOT_PART_START=$((BOOT_PART_START + BOOT_PART_SIZE))
+ROOT_PART_SIZE=$(((ROOT_SIZE + ROOT_MARGIN + ALIGN  - 1) / ALIGN * ALIGN))
+IMG_SIZE=$((BOOT_PART_START + BOOT_PART_SIZE + ROOT_PART_SIZE))
 
 truncate -s "${IMG_SIZE}" "${IMG_FILE}"
-fdisk -H 255 -S 63 "${IMG_FILE}" <<EOF
-o
-n
 
-
+parted --script "${IMG_FILE}" mklabel msdos
-8192
+parted --script "${IMG_FILE}" unit B mkpart primary fat32 "${BOOT_PART_START}" "$((BOOT_PART_START + BOOT_PART_SIZE - 1))"
-+$((BOOT_SIZE * 2 /512))
+parted --script "${IMG_FILE}" unit B mkpart primary ext4 "${ROOT_PART_START}" "$((ROOT_PART_START + ROOT_PART_SIZE - 1))"
-p
-t
-c
-n
-
-
-${ROUNDED_ROOT_SECTOR}
-
-
-p
-w
-EOF
 
 PARTED_OUT=$(parted -sm "${IMG_FILE}" unit b print)
 BOOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^1:' | cut -d':' -f 2 | tr -d B)

export-noobs/00-release/00-run.sh

@@ -10,17 +10,23 @@ install -v		files/release_notes.txt		"${NOOBS_DIR}/"
 
 tar -v -c -C		files/marketing			-f "${NOOBS_DIR}/marketing.tar" .
 
+BOOT_SHASUM="$(sha256sum "${NOOBS_DIR}/boot.tar.xz" | cut -f1 -d' ')"
+ROOT_SHASUM="$(sha256sum "${NOOBS_DIR}/root.tar.xz" | cut -f1 -d' ')"
+
 BOOT_SIZE="$(xz --robot -l "${NOOBS_DIR}/boot.tar.xz"  | grep totals | cut -f 5)"
 ROOT_SIZE="$(xz --robot -l "${NOOBS_DIR}/root.tar.xz"  | grep totals | cut -f 5)"
 
 BOOT_SIZE="$(( BOOT_SIZE / 1024 / 1024 + 1))"
 ROOT_SIZE="$(( ROOT_SIZE / 1024 / 1024 + 1))"
 
-BOOT_NOM="$(( BOOT_SIZE * 3 ))"
+BOOT_NOM="256"
 ROOT_NOM="$(( ROOT_SIZE + 400 ))"
 
 mv "${NOOBS_DIR}/OS.png" "${NOOBS_DIR}/${NOOBS_NAME// /_}.png"
 
+sed "${NOOBS_DIR}/partitions.json" -i -e "s|BOOT_SHASUM|${BOOT_SHASUM}|"
+sed "${NOOBS_DIR}/partitions.json" -i -e "s|ROOT_SHASUM|${ROOT_SHASUM}|"
+
 sed "${NOOBS_DIR}/partitions.json" -i -e "s|BOOT_SIZE|${BOOT_SIZE}|"
 sed "${NOOBS_DIR}/partitions.json" -i -e "s|ROOT_SIZE|${ROOT_SIZE}|"
 

export-noobs/00-release/files/os.json

@@ -1,7 +1,7 @@
 {
     "description": "NOOBS_DESCRIPTION",
     "feature_level": 35120124,
-    "kernel": "4.14",
+    "kernel": "4.19",
     "name": "NOOBS_NAME",
     "password": "raspberry",
     "release_date": "UNRELEASED",
@@ -11,9 +11,10 @@
         "Pi 2",
         "Pi Zero",
         "Pi 3",
-        "Pi Compute Module 3"
+        "Pi Compute Module 3",
+        "Pi 4"
     ],
     "url": "http://www.raspbian.org/",
     "username": "pi",
-    "version": "stretch"
+    "version": "buster"
 }

export-noobs/00-release/files/partition_setup.sh

@@ -33,7 +33,12 @@ if [ -z "$restore" ]; then
   fi
 
   if ! grep -q resize /proc/cmdline; then
-    sed -i 's| init=/usr/lib/raspi-config/init_resize.sh||;s| quiet||2g' /tmp/1/cmdline.txt
+    if ! grep -q splash /tmp/1/cmdline.txt; then
+      sed -i "s| quiet||g" /tmp/1/cmdline.txt
+    fi
+    sed -i 's| init=/usr/lib/raspi-config/init_resize.sh||' /tmp/1/cmdline.txt
+  else
+    sed -i '1 s|.*|& sdhci.debug_quirks2=4|' /tmp/1/cmdline.txt
   fi
 fi
 

export-noobs/00-release/files/partitions.json

@@ -6,7 +6,8 @@
             "mkfs_options": "-F 32",
             "partition_size_nominal": BOOT_NOM,
             "uncompressed_tarball_size": BOOT_SIZE,
-            "want_maximised": false
+            "want_maximised": false,
+            "sha256sum": "BOOT_SHASUM"
         },
         {
             "filesystem_type": "ext4",
@@ -14,7 +15,8 @@
             "mkfs_options": "-O ^huge_file",
             "partition_size_nominal": ROOT_NOM,
             "uncompressed_tarball_size": ROOT_SIZE,
-            "want_maximised": true
+            "want_maximised": true,
+            "sha256sum": "ROOT_SHASUM"
         }
     ]
 }

export-noobs/00-release/files/release_notes.txt

@@ -1,4 +1,120 @@
 UNRELEASED:
+  * Version 3.2.6 of Thonny included - significant improvements in speed, particularly when debugging
+  * Version 1.0.4 of Scratch 3 included - adds new "display stage" and "display sprite" blocks to SenseHAT extension, and loading of files from command line
+  * Version 32.0.0.314 of Flash player included
+  * Version 1.0.3 of NodeRED included
+  * Version 6.6.0 of RealVNC Server and version 6.19.923 of RealVNC Viewer included - adds support for audio
+  * Version 78.0.3904.108 of Chromium included
+  * Mesa updated to 19.3.2 for OpenGL ES 3.1 conformance
+  * Pixel doubling option added in Raspberry Pi Configuration on platforms using FKMS display driver
+  * Orca screen reader added to Recommended Software
+  * Code The Classics Python games added to Recommended Software
+  * File manager - new "places" pane added at top of sidebar to show mounted drives in simplified view; "new folder" icon added to taskbar; expanders in directory browser now correctly show state of subfolders
+  * Multiple monitor support improved - alignment of icons on second desktop corrected, Appearance Settings opens on correct tab when launched from context menu
+  * Raspberry Pi Touchscreen correctly aligned with display
+  * System clock synchronised before installing new packages in startup wizard and Recommended Software
+  * Mixer dialogs added to taskbar volume plugin; separate Audio Preferences application removed
+  * Raspberry Pi Configuration - separate tab added for display options; screen blanking control added
+  * Volume taskbar plugin and raspi-config modified to support separate ALSA devices for internal audio outputs (analogue and HDMI 1 and 2)
+  * Robustness improvements in volume, ejecter and battery taskbar plugins
+  * Movement of mouse pointer to menu button on startup now controlled by point_at_menu parameter in Global section of lxpanel configuration file
+  * Ctrl-Alt-Del and Ctrl-Alt-End shortcuts added to open shutdown options box
+  * Ctrl-Shift-Esc shortcut added to open task manager
+  * Enabled NEON routines in OpenSSL
+  * Linux kernel 4.19.93
+  * Raspberry Pi firmware 67392a7a32bddad7f571047fccafca9eeb65d29c
+2019-09-26:
+  * rpi-eeprom included
+    - This will automatically update the SPI EEPROM on the Raspberry Pi 4 to the latest stable version.
+       See https://rpf.io/eeprom for more information.
+  * New icon theme for file manager icons
+  * Appearance Settings - option for identical desktop on both monitors
+  * Appearance Settings - option to show different desktop icons on both monitors
+  * Taskbar automatically moved to monitor 0 if monitor 1 not found at boot
+  * Switching of audio output between two HDMI devices added to volume plugin
+  * Switching of audio input devices added to volume plugin
+  * .asoundrc (ALSA config file) now uses 'plug' values to support more devices
+  * Audio Settings tool modified to integrate more closely with volume plugin to reduce duplicated code
+  * Screen Configuration tool now shows separate menus for resolution and refresh rate
+  * Primary and active monitor settings removed from Screen Configuration tool
+  * Overscan support added for FKMS driver
+  * New keyboard shortcuts added - Ctrl-Alt-End brings up shutdown menu; Ctrl-Alt-M moves taskbar between monitors
+  * Latest changes to Bluez ALSA interface integrated to improve connection to Bluetooth audio devices
+  * Mousepad used as simple text editor instead of leafpad
+  * Version 3.2 of Thonny added
+  * Version 74 of Chromium added
+  * Version 3.0.8 of VLC added
+  * Version 32.0.0.255 of Flash player added
+  * Version 6.5.0 of RealVNC Server added
+  * Version 6.19.715 of RealVNC Viewer added (full image only)
+  * Version 12.0.1 of Mathematica added (full image only)
+  * Version 0.20.8 of NodeRED added (full image only)
+  * Version 3.1.0 of Sonic Pi added (full image only)
+  * Scratch 3 added (full image only)
+  * Bug fix - URL handling in Terminal
+  * Bug fix - octal values in SSIDs in network plugin
+  * Bug fix - remaining value in progress bar when transferring files
+  * Bug fix - integration of xarchiver tool with file manager
+  * Bug fix - start menu opening on incorrect monitor
+  * Bug fix - minimised applications wrongly displayed on taskbar on second monitor
+  * Bug fix - Bluetooth icon disappearing on x86 platforms when Bluetooth turned off
+  * Bug fix - Screen Configuration tool not shown on x86 platforms and settings not being saved
+  * Various translation updates
+  * Various minor bug fixes
+  * Epiphany/Web removed
+  * ntfs-3g included
+  * pciutils added
+  * Linux kernel 4.19.75
+  * Raspberry Pi firmware 01508e81ec1e918448227ca864616d56c430b46d
+2019-07-10:
+  * Clearer options for switching of Pi 4 video output in Raspberry Pi Configuration
+  * Option added to Appearance Settings to move taskbar to second monitor
+  * Option added to Recommended Software to restrict package installs by architecture
+  * New version of Adobe Flash player (32.0.0.223)
+  * Selection of screen refresh rates added to Screen Configuration
+  * Fix for missing text insertion cursor in LibreOffice on Pi 4
+  * Fix for Wi-fi interruption when Wi-fi icon on taskbar is clicked
+  * FIx for incorrect desktop background behind desktop login prompt
+  * Fix for segmentation faults when launching obconf and lxapperarance
+  * Fix for unclosed file pointer in Screen Configuration
+  * Fix for Bluetooth plugin freeze when large numbers of devices detected
+  * Fix for opening URLs not working in lxterminal
+  * Fix for start menu opening on incorrect monitor when launched from keyboard
+  * Fix for taskbar item not having [] removed when un-minimising on second monitor
+  * Fix for Chromium video playback and WebGL performance on Pi 4
+  * Remove 4kp60 option from Raspberry Pi Configuration
+  * Rename hdmi_enable_4k to hdmi_enable_4kp60 in /boot/config.txt and raspi-config
+  * Linux kernel 4.19.57
+  * Raspberry Pi firmware 356f5c2880a3c7e8774025aa6fc934a617553e7b
+2019-06-20:
+  * Based on Debian Buster
+  * Support for Raspberry Pi 4 hardware
+  * FKMS OpenGL desktop graphics driver and xcompmgr compositing window manager used when running on Raspberry Pi 4
+  * Screen Configuration application added for use with FKMS driver
+  * Raspberry Pi 4 video output options added to Raspberry Pi Configuration
+  * Uses new PiXflat UI theme for GTK and Openbox
+  * CPU activity gauge plugin no longer shown on taskbar by default
+  * CPU temperature gauge plugin added (not shown by default)
+  * USB ejecter and Bluetooth taskbar icons hidden when not appropriate
+  * Version 74.0.3729.157 of Chromium web browser included
+  * Version 32.0.0.207 of Flash player included
+  * IDLE Python IDE removed
+  * Wolfram Mathematica removed temporarily due to incompatibility with Buster
+  * Display of package sizes removed from Recommended Software
+  * Appearance Settings modified to support independent settings for two monitors
+  * Oracle Java 7 and 8 replaced with OpenJDK 11
+  * Miscellaneous small bug fixes
+  * On-board 5GHz WiFi blocked by rfkill by default
+    The block is removed when taking one of the following actions:
+    - Selecting a locale in the first run wizard
+    - Setting the WiFi country in the Raspberry Pi Configuration tool or the Network Settings applet
+    - Setting the WiFi country in raspi-config
+    - Providing a wpa_supplicant.conf file through the boot partition
+    - Running 'rfkill unblock wifi'
+  * Boot partition size set to 256M
+  * Linux kernel 4.19.50
+  * Raspberry Pi firmware 88ca9081f5e51cdedd16d5dbc85ed12a25123201
+2019-04-08:
   * Chromium browser updated to version 72
   * VLC media player updated to version 3.0.6
   * RealVNC Server updated to version 6.4.0

scripts/common

@@ -9,7 +9,7 @@ bootstrap(){
 
 	export http_proxy=${APT_PROXY}
 
-	if [ "$(dpkg --print-architecture)" !=  "armhf" ]; then
+	if [ "$(dpkg --print-architecture)" !=  "armhf" ] && [ "$(dpkg --print-architecture)" !=  "aarch64" ]; then
 		BOOTSTRAP_CMD=qemu-debootstrap
 	fi
 
@@ -17,8 +17,9 @@ bootstrap(){
 	BOOTSTRAP_ARGS+=(--components "main,contrib,non-free")
 	BOOTSTRAP_ARGS+=(--keyring "${STAGE_DIR}/files/raspberrypi.gpg")
 	BOOTSTRAP_ARGS+=("$@")
+	printf -v BOOTSTRAP_STR '%q ' "${BOOTSTRAP_ARGS[@]}"
 
-	capsh --drop=cap_setfcap -- "${BOOTSTRAP_CMD}" "${BOOTSTRAP_ARGS[@]}" || true
+	setarch linux32 capsh --drop=cap_setfcap -- -c "'${BOOTSTRAP_CMD}' $BOOTSTRAP_STR" || true
 
 	if [ -d "$2/debootstrap" ]; then
 		rmdir "$2/debootstrap"
@@ -89,14 +90,11 @@ on_chroot() {
 		mount --bind /sys "${ROOTFS_DIR}/sys"
 	fi
 
-	capsh --drop=cap_setfcap "--chroot=${ROOTFS_DIR}/" -- -e "$@"
+	setarch linux32 capsh --drop=cap_setfcap "--chroot=${ROOTFS_DIR}/" -- -e "$@"
 }
 export -f on_chroot
 
 update_issue() {
-	local GIT_HASH
-	GIT_HASH=$(git rev-parse HEAD)
 	echo -e "Raspberry Pi reference ${IMG_DATE}\nGenerated using ${PI_GEN}, ${PI_GEN_REPO}, ${GIT_HASH}, ${1}" > "${ROOTFS_DIR}/etc/rpi-issue"
 }
 export -f update_issue
-

stage0/00-configure-apt/files/raspi.list

@@ -1,3 +1,3 @@
-deb http://archive.raspberrypi.org/debian/ stretch main ui staging
+deb http://archive.raspberrypi.org/debian/ buster main
 # Uncomment line below then 'apt-get update' to enable 'apt-get source'
-#deb-src http://archive.raspberrypi.org/debian/ stretch main ui
+#deb-src http://archive.raspberrypi.org/debian/ buster main

stage0/00-configure-apt/files/sources.list

@@ -1,3 +1,3 @@
-deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
+deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
 # Uncomment line below then 'apt-get update' to enable 'apt-get source'
-#deb-src http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
+#deb-src http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi

stage0/prerun.sh

@@ -1,5 +1,5 @@
 #!/bin/bash -e
 
 if [ ! -d "${ROOTFS_DIR}" ]; then
-	bootstrap stretch "${ROOTFS_DIR}" http://raspbian.raspberrypi.org/raspbian/
+	bootstrap buster "${ROOTFS_DIR}" http://raspbian.raspberrypi.org/raspbian/
 fi

stage1/00-boot-files/files/cmdline.txt

@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
+console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

stage1/00-boot-files/files/config.txt

@@ -47,10 +47,19 @@
 #dtparam=i2s=on
 #dtparam=spi=on
 
-# Uncomment this to enable the lirc-rpi module
+# Uncomment this to enable infrared communication.
-#dtoverlay=lirc-rpi
+#dtoverlay=gpio-ir,gpio_pin=17
+#dtoverlay=gpio-ir-tx,gpio_pin=18
 
 # Additional overlays and parameters are documented /boot/overlays/README
 
 # Enable audio (loads snd_bcm2835)
 dtparam=audio=on
+
+[pi4]
+# Enable DRM VC4 V3D driver on top of the dispmanx display stack
+dtoverlay=vc4-fkms-v3d
+max_framebuffers=2
+
+[all]
+#dtoverlay=vc4-fkms-v3d

stage1/02-net-tweaks/00-patches/01-hosts.diff

@@ -1,9 +0,0 @@
-Index: jessie-stage1/rootfs/etc/hosts
-===================================================================
---- jessie-stage1.orig/rootfs/etc/hosts
-+++ jessie-stage1/rootfs/etc/hosts
-@@ -3,3 +3,4 @@
- ff02::1		ip6-allnodes
- ff02::2		ip6-allrouters
- 
-+127.0.1.1	raspberrypi

stage1/02-net-tweaks/00-patches/series

@@ -1 +0,0 @@
-01-hosts.diff

stage1/02-net-tweaks/00-run.sh

@@ -1,6 +1,6 @@
 #!/bin/bash -e
 
-install -m 644 files/ipv6.conf "${ROOTFS_DIR}/etc/modprobe.d/ipv6.conf"
+echo "${TARGET_HOSTNAME}" > "${ROOTFS_DIR}/etc/hostname"
-install -m 644 files/hostname "${ROOTFS_DIR}/etc/hostname"
+echo "127.0.1.1		${TARGET_HOSTNAME}" >> "${ROOTFS_DIR}/etc/hosts"
 
 ln -sf /dev/null "${ROOTFS_DIR}/etc/systemd/network/99-default.link"

stage1/02-net-tweaks/files/hostname

@@ -1 +0,0 @@
-raspberrypi

stage1/02-net-tweaks/files/interfaces

@@ -1,4 +0,0 @@
-auto lo
-
-iface lo inet loopback
-iface eth0 inet dhcp

stage1/02-net-tweaks/files/ipv6.conf

@@ -1,3 +0,0 @@
-# Don't load ipv6 by default
-alias net-pf-10 off
-#alias ipv6 off

stage2/00-copies-and-fills/02-run.sh

@@ -0,0 +1,6 @@
+#!/bin/bash -e
+
+if [ -f "${ROOTFS_DIR}/etc/ld.so.preload" ]; then
+   mv "${ROOTFS_DIR}/etc/ld.so.preload" "${ROOTFS_DIR}/etc/ld.so.preload.disabled"
+fi
+

stage2/01-sys-tweaks/00-debconf

@@ -15,7 +15,7 @@ keyboard-configuration	keyboard-configuration/altgr	select	The default for the k
 keyboard-configuration	keyboard-configuration/model	select	Generic 105-key (Intl) PC
 # Keymap to use:
 # Choices: American English, Albanian, Arabic, Asturian, Bangladesh, Belarusian, Bengali, Belgian, Bosnian, Brazilian, British English, Bulgarian, Bulgarian (phonetic layout), Burmese, Canadian French, Canadian Multilingual, Catalan, Chinese, Croatian, Czech, Danish, Dutch, Dvorak, Dzongkha, Esperanto, Estonian, Ethiopian, Finnish, French, Georgian, German, Greek, Gujarati, Gurmukhi, Hebrew, Hindi, Hungarian, Icelandic, Irish, Italian, Japanese, Kannada, Kazakh, Khmer, Kirghiz, Korean, Kurdish (F layout), Kurdish (Q layout), Lao, Latin American, Latvian, Lithuanian, Macedonian, Malayalam, Nepali, Northern Sami, Norwegian, Persian, Philippines, Polish, Portuguese, Punjabi, Romanian, Russian, Serbian (Cyrillic), Sindhi, Sinhala, Slovak, Slovenian, Spanish, Swedish, Swiss French, Swiss German, Tajik, Tamil, Telugu, Thai, Tibetan, Turkish (F layout), Turkish (Q layout), Ukrainian, Uyghur, Vietnamese
-keyboard-configuration	keyboard-configuration/xkb-keymap	select	gb
+keyboard-configuration	keyboard-configuration/xkb-keymap	select	${KEYBOARD_KEYMAP}
 # Compose key:
 # Choices: No compose key, Right Alt (AltGr), Right Control, Right Logo key, Menu key, Left Logo key, Caps Lock
 keyboard-configuration	keyboard-configuration/compose	select	No compose key
@@ -23,4 +23,4 @@ keyboard-configuration	keyboard-configuration/compose	select	No compose key
 keyboard-configuration	keyboard-configuration/ctrl_alt_bksp	boolean	true
 # Keyboard layout:
 # Choices: English (UK), English (UK) - English (UK\, Colemak), English (UK) - English (UK\, Dvorak with UK punctuation), English (UK) - English (UK\, Dvorak), English (UK) - English (UK\, Macintosh international), English (UK) - English (UK\, Macintosh), English (UK) - English (UK\, extended WinKeys), English (UK) - English (UK\, international with dead keys), Other
-keyboard-configuration  keyboard-configuration/variant  select  English (UK)
+keyboard-configuration  keyboard-configuration/variant  select  ${KEYBOARD_LAYOUT}

stage2/01-sys-tweaks/00-packages

@@ -14,7 +14,6 @@ raspberrypi-sys-mods
 pi-bluetooth
 apt-listchanges
 usb-modeswitch
-apt-transport-https
 libpam-chksshpwd
 rpi-update
 libmtp-runtime
@@ -25,3 +24,7 @@ policykit-1
 ssh-import-id
 rng-tools
 ethtool
+vl805fw
+ntfs-3g
+pciutils
+rpi-eeprom

stage2/01-sys-tweaks/00-patches/07-resize-init.diff

@@ -1,5 +1,5 @@
---- a/rootfs/boot/cmdline.txt
+--- stage2.orig/rootfs/boot/cmdline.txt
-+++ b/rootfs/boot/cmdline.txt
++++ stage2/rootfs/boot/cmdline.txt
 @@ -1 +1 @@
--dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
+-console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
-+dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet init=/usr/lib/raspi-config/init_resize.sh
++console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet init=/usr/lib/raspi-config/init_resize.sh

stage2/02-net-tweaks/01-run.sh

@@ -12,6 +12,20 @@ fi
 
 if [ -v WPA_ESSID ] && [ -v WPA_PASSWORD ]; then
 on_chroot <<EOF
-wpa_passphrase "${WPA_ESSID}" "${WPA_PASSWORD}" >> "/etc/wpa_supplicant/wpa_supplicant.conf"
+set -o pipefail
+wpa_passphrase "${WPA_ESSID}" "${WPA_PASSWORD}" | tee -a "/etc/wpa_supplicant/wpa_supplicant.conf"
 EOF
+elif [ -v WPA_ESSID ]; then
+cat >> "${ROOTFS_DIR}/etc/wpa_supplicant/wpa_supplicant.conf" << EOL
+
+network={
+	ssid="${WPA_ESSID}"
+	key_mgmt=NONE
+}
+EOL
 fi
+
+# Disable wifi on 5GHz models
+mkdir -p "${ROOTFS_DIR}/var/lib/systemd/rfkill/"
+echo 1 > "${ROOTFS_DIR}/var/lib/systemd/rfkill/platform-3f300000.mmcnr:wlan"
+echo 1 > "${ROOTFS_DIR}/var/lib/systemd/rfkill/platform-fe300000.mmcnr:wlan"

stage2/03-set-timezone/02-run.sh

@@ -1,6 +1,6 @@
 #!/bin/bash -e
 
-echo "Europe/London" > "${ROOTFS_DIR}/etc/timezone"
+echo "${TIMEZONE_DEFAULT}" > "${ROOTFS_DIR}/etc/timezone"
 rm "${ROOTFS_DIR}/etc/localtime"
 
 on_chroot << EOF

stage3/00-install-packages/00-packages

@@ -12,3 +12,4 @@ gldriver-test
 fonts-droid-fallback
 fonts-liberation2
 obconf
+arandr

stage3/00-install-packages/00-packages-nr

@@ -1,6 +1,6 @@
 xserver-xorg-video-fbdev xserver-xorg xinit xserver-xorg-video-fbturbo
-epiphany-browser
+mousepad
-lxde lxtask menu-xdg gksu
+lxde lxtask menu-xdg
-netsurf-gtk zenity xdg-utils
+zenity xdg-utils
 gvfs-backends gvfs-fuse
 lightdm gnome-themes-standard-data gnome-icon-theme

stage4/00-install-packages/00-packages

@@ -1,6 +1,5 @@
-java-common oracle-java8-jdk
+python python3-pygame python-pygame python-tk
-python idle python3-pygame python-pygame python-tk
+python3 python3-tk thonny
-python3 idle3 python3-tk
 python3-pgzero
 python-serial python3-serial
 python-picamera python3-picamera
@@ -11,7 +10,7 @@ python3-numpy
 pypy
 alacarte rc-gui sense-hat
 tree
-libgl1-mesa-dri libgles1-mesa libgles2-mesa xcompmgr
+libgl1-mesa-dri libgles1 libgles2-mesa xcompmgr
 geany
 piclone
 wiringpi pigpio python-pigpio python3-pigpio raspi-gpio python-gpiozero python3-gpiozero python3-rpi.gpio
@@ -19,9 +18,8 @@ python-spidev python3-spidev
 python-twython python3-twython
 python-smbus python3-smbus
 python-flask python3-flask
-python-picraft python3-picraft
 pprompt
 piwiz
 rp-prefapps
-libav-tools
+ffmpeg
 vlc

stage4/00-install-packages/00-packages-nr

@@ -1,3 +1,2 @@
-timidity
 pi-package
 realvnc-vnc-server

stage4/01-console-autologin/00-run.sh

@@ -1,4 +1,5 @@
 #!/bin/bash -e
 
-ln -sf /etc/systemd/system/[email protected] \
+on_chroot << EOF
-	"${ROOTFS_DIR}/etc/systemd/system/getty.target.wants/[email protected]"
+	SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_boot_behaviour B4
+EOF

stage4/03-magpi/00-run.sh

@@ -1,12 +1,12 @@
 #!/bin/sh -e
 
 magpi_regex="MagPi[[:digit:]]*.pdf"
-magpi_loc="https://www.raspberrypi.org/magpi-issues"
+magpi_loc="$(curl -s https://magpi.raspberrypi.org/latest-pdf)"
-magpi_latest="$(curl "$magpi_loc/?C=M;O=D" -s | grep "$magpi_regex" -m 1 -o | head -n 1)"
+magpi_latest="$(echo "$magpi_loc" | grep "$magpi_regex" -m 1 -o)"
 
 if [ ! -f "files/$magpi_latest" ]; then
 	find files/ -regextype grep -regex "files/$magpi_regex" -delete
-	wget "$magpi_loc/$magpi_latest" -O "files/$magpi_latest"
+	wget "$magpi_loc" -O "files/$magpi_latest"
 fi
 
 file "files/$magpi_latest" | grep -q "PDF document"

stage4/04-enable-xcompmgr/00-run.sh

@@ -0,0 +1,5 @@
+#!/bin/bash -e
+
+on_chroot << EOF
+	raspi-config nonint do_xcompmgr 0
+EOF

stage5/00-install-extras/00-packages

@@ -1,15 +1,16 @@
-python3-thonny
+mu-editor
 sonic-pi
-scratch nuscratch scratch2
+scratch nuscratch scratch2 scratch3
 smartsim
 
-minecraft-pi python-minecraftpi
+minecraft-pi python-minecraftpi python-picraft python3-picraft
 python-sense-emu sense-emu-tools python-sense-emu-doc
 
 wolfram-engine
 claws-mail
-greenfoot bluej
+greenfoot-unbundled bluej
 nodered
 realvnc-vnc-viewer
 
 python-games
+code-the-classics