Remove Mathematica

Dockerfile

@@ -6,7 +6,7 @@ RUN apt-get -y update && \
     apt-get -y install \
         git vim parted \
         quilt realpath qemu-user-static debootstrap zerofree pxz zip dosfstools \
-        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd \
+        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file \
     && rm -rf /var/lib/apt/lists/*
 
 COPY . /pi-gen/

README.md

@@ -13,7 +13,7 @@ To install the required dependencies for pi-gen you should run:
 
 ```bash
 apt-get install quilt parted realpath qemu-user-static debootstrap zerofree pxz zip \
-dosfstools bsdtar libcap2-bin grep rsync xz-utils
+dosfstools bsdtar libcap2-bin grep rsync xz-utils file git
 ```
 
 The file `depends` contains a list of tools needed.  The format of this
@@ -249,3 +249,26 @@ follows:
  * Once you're happy with the image you can remove the SKIP_IMAGES files and
    export your image to test
 
+# Troubleshooting
+
+## `binfmt_misc`
+
+Linux is able execute binaries from other architectures, meaning that it should be
+possible to make use of `pi-gen` on an x86_64 system, even though it will be running
+ARM binaries. This requires support from the [`binfmt_misc`](https://en.wikipedia.org/wiki/Binfmt_misc)
+kernel module.
+
+You may see the following error:
+
+```
+update-binfmts: warning: Couldn't load the binfmt_misc module.
+```
+
+To resolve this, ensure that the following files are available (install them if necessary):
+
+```
+/lib/modules/$(uname -r)/kernel/fs/binfmt_misc.ko
+/usr/bin/qemu-arm-static
+```
+
+You may also need to load the module by hand - run `modprobe binfmt_misc`.

depends

@@ -13,3 +13,5 @@ rsync
 xz:xz-utils
 curl
 xxd
+file
+git

export-noobs/00-release/files/partition_setup.sh

@@ -29,7 +29,7 @@ if [ -f /settings/wpa_supplicant.conf ]; then
 fi
 
 if ! grep -q resize /proc/cmdline; then
-  sed -i 's| quiet init=/usr/lib/raspi-config/init_resize.sh||' /tmp/1/cmdline.txt
+  sed -i 's| init=/usr/lib/raspi-config/init_resize.sh||;s| quiet||2g' /tmp/1/cmdline.txt
 fi
 
 umount /tmp/1

export-noobs/00-release/files/release_notes.txt

@@ -1,4 +1,32 @@
 UNRELEASED:
+  * In startup wizard, assign keyboard to country as per Debian installer recommendations
+  * In startup wizard, add option to use US keyboard in preference to country-specific option
+  * In startup wizard, show IP address on first page
+  * In startup wizard, check for existing wifi network connection and show it if there is one
+  * In startup wizard, install language support packages for LibreOffice and other applications
+  * In startup wizard, improve operation with keyboard only and no mouse
+  * Password change in Raspberry Pi Configuration and startup wizard now works properly if passwords contain shell characters
+  * Battery indicator plugin modified to cope with Pi-top hardware monitor crashing
+  * Networking plugin hides wifi password characters by default
+  * In Scratch 2 GPIO plugin, set pin from dropdown list rather than free text
+  * In Scratch 2 SenseHAT plugin, swap x and y axis values for LED array
+  * Include latest Adobe Flash player (31.0.0.108)
+  * Include latest RealVNC Server (6.3.1)
+  * Include libav-tools
+  * Include ssh-import-id
+  * Removed Mathematica
+  * Merge in latest third-party code for Bluetooth ALSA interface
+  * Add ability to prevent software update changing configuration files, by creating ~/.config/.lock file
+  * Various other small bug fixes, tweaks and changes to text
+  * Make dhcpcd work with 3G devices
+  * Set default timezone to 'Europe/London'
+  * Add hw acceleration to ffmpeg
+  * Improved WiFi-BT coexistence parameters
+  * Run fake-hwclock before systemd-fsck-root
+  * Raspberry Pi PoE HAT support
+  * Linux kernel 4.14.71
+  * Raspberry Pi firmware 5b49caa17e91d0e64024380119ad739bb201c674
+2018-06-27:
   * New first-boot configuration wizard added
   * Recommended Software installer added
   * Bluej, Greenfoot, NodeRED, Claws Mail, VNC Viewer removed from image - can now be installed from Recommended Applications
@@ -24,7 +52,7 @@ UNRELEASED:
     - SCO profile suppot added via bthelper.service
   * Linux kernel 4.14.50+
   * Raspberry Pi firmware 748fb17992426bb29d99224b93cb962fefbdc833
-2018-08-14:
+2018-04-18:
   * Fixed race between wifi-country.service and raspberrypi-net-mods.service
   * Linux kernel 4.14.34+
   * Raspberry Pi firmware 5db8e4e1c63178e200d6fbea23ed4a9bf4656658

stage2/01-sys-tweaks/00-debconf

@@ -7,12 +7,8 @@ console-setup   console-setup/codeset47 select  Guess optimal character set
 # Font for the console:
 # Choices: Fixed, Goha, GohaClassic, Terminus, TerminusBold, TerminusBoldVGA, VGA, Do not change the boot/kernel font, Let the system select a suitable font
 console-setup   console-setup/fontface47        select  Do not change the boot/kernel font
-# Geographic area:
+tzdata	tzdata/Areas	select	Europe
-# Choices: Africa, America, Antarctica, Australia, Arctic Ocean, Asia, Atlantic Ocean, Europe, Indian Ocean, Pacific Ocean, System V timezones, US, None of the above
+tzdata	tzdata/Zones/Europe	select	London
-tzdata	tzdata/Areas	select	Etc
-# Time zone:
-# Choices: GMT, GMT+0, GMT+1, GMT+10, GMT+11, GMT+12, GMT+2, GMT+3, GMT+4, GMT+5, GMT+6, GMT+7, GMT+8, GMT+9, GMT-0, GMT-1, GMT-10, GMT-11, GMT-12, GMT-13, GMT-14, GMT-2, GMT-3, GMT-4, GMT-5, GMT-6, GMT-7, GMT-8, GMT-9, GMT0, Greenwich, UCT, UTC, Universal, Zulu
-tzdata	tzdata/Zones/Etc	select	UTC
 # Key to function as AltGr:
 # Choices: The default for the keyboard layout, No AltGr key, Right Alt (AltGr), Right Control, Right Logo key, Menu key, Left Alt, Left Logo key, Keypad Enter key, Both Logo keys, Both Alt keys
 keyboard-configuration	keyboard-configuration/altgr	select	The default for the keyboard layout

stage2/01-sys-tweaks/00-packages

@@ -22,3 +22,4 @@ rsync
 htop
 man-db
 policykit-1
+ssh-import-id

stage4/00-install-packages/00-packages

@@ -31,3 +31,4 @@ scratch2
 python3-thonny
 piwiz
 rp-prefapps
+libav-tools

stage4/00-install-packages/02-packages

@@ -0,0 +1,6 @@
+hunspell-en-gb
+hyphen-en-gb
+libreoffice-help-en-gb
+libreoffice-l10n-en-gb
+wamerican
+wbritish

stage4/EXPORT_IMAGE

@@ -1,4 +1,4 @@
-IMG_SUFFIX="-4GB"
+IMG_SUFFIX=""
 if [ "${USE_QEMU}" = "1" ]; then
 	export IMG_SUFFIX="${IMG_SUFFIX}-qemu"
 fi

stage5/00-install-mathematica/00-packages

@@ -1 +0,0 @@
-wolfram-engine

stage5/EXPORT_IMAGE

@@ -1,4 +0,0 @@
-IMG_SUFFIX=""
-if [ "${USE_QEMU}" = "1" ]; then
-	export IMG_SUFFIX="${IMG_SUFFIX}-qemu"
-fi

stage5/prerun.sh

@@ -1,5 +0,0 @@
-#!/bin/bash -e
-
-if [ ! -d "${ROOTFS_DIR}" ]; then
-	copy_previous
-fi