Updated Dride to Raspbian Stretch (#1)

* Stretch base system working W/O DRIDE - Currently removed Dride edits/software to get base OS working * Enabled Ether over USB I slightly rearranged a few startups in stage2 to give us room for more expansion later. Boot files update important to come prior to Dride software. Stretch base system working W/O DRIDE * Dride+Stretch working - wifi works with specific Dride network - usb0 interface also works if you need to debug/hack All Dride network items have been separated into this step * DrideOS gets Dride software added back in on Debian Stretch - software base; testing commencing * Added new dride partition, clean, updated README - updated README to explain how this has been modified vs. upstream - removed and cleaned unused scripts - added dride partition creation on startup (runonce) - drideOS conditional renamed to dride-plus * Use the /dride path and provide soft links during software installation - updated README
2018-02-11 10:34:42 +02:00
parent 70fb0a72b8
commit 23b2c929a2
26 changed files with 602 additions and 486 deletions
@@ -0,0 +1,3 @@
+hostapd
+#isc-dhcp-server
+dnsmasq
@@ -0,0 +1,71 @@
+#!/bin/bash -e
+
+# on_chroot << EOF
+# bash -c "$(curl -s https://dride.io/code/install.sh)"
+# EOF
+
+
+on_chroot << EOC
+
+#apt-get remove --purge hostapd -yqq
+#apt-get update -yqq
+#apt-get upgrade -yqq
+#apt-get install hostapd dnsmasq -yqq
+
+cat > /etc/dnsmasq.conf <<EOF
+interface=wlan0
+dhcp-range=192.168.42.10,192.168.42.20,255.255.255.0,12h
+EOF
+
+cat > /etc/hostapd/hostapd.conf <<EOF
+interface=wlan0
+hw_mode=g
+channel=10
+auth_algs=1
+wpa=2
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=CCMP
+rsn_pairwise=CCMP
+wpa_passphrase=ilovedride
+ssid=dride
+ieee80211n=1
+wmm_enabled=1
+ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]
+EOF
+
+sed -i -- 's/allow-hotplug wlan0//g' /etc/network/interfaces
+sed -i -- 's/iface wlan0 inet manual//g' /etc/network/interfaces
+sed -i -- 's/    wpa-conf \/etc\/wpa_supplicant\/wpa_supplicant.conf//g' /etc/network/interfaces
+sed -i -- 's/#DAEMON_CONF=""/DAEMON_CONF="\/etc\/hostapd\/hostapd.conf"/g' /etc/default/hostapd
+
+cat >> /etc/network/interfaces <<EOF
+
+auto usb0
+allow-hotplug usb0
+iface usb0 inet dhcp
+
+# Added by rPi Access Point Setup
+allow-hotplug wlan0
+iface wlan0 inet static
+    address 192.168.42.1
+    netmask 255.255.255.0
+    network 192.168.42.0
+    broadcast 192.168.42.255
+
+EOF
+
+echo "denyinterfaces wlan0" >> /etc/dhcpcd.conf
+sudo systemctl disable dhcpcd.service
+
+sudo systemctl enable hostapd
+sudo systemctl enable dnsmasq
+
+sudo service hostapd start
+sudo service dnsmasq start
+
+echo "All done! Please reboot"
+
+EOC
+
+# fix Stretch dhcpcd5 to not ignore in /etc/network/interfaces
+install -m 644 files/usr_lib_dhcpcd ${ROOTFS_DIR}/usr/lib/dhcpcd5/dhcpcd
@@ -0,0 +1,28 @@
+#!/bin/sh -e
+
+#
+# This file belongs in /usr/lib/dhcpcd5/dhcpcd how you get it there is up to you
+#
+
+DHCPCD=/sbin/dhcpcd
+INTERFACES=/etc/network/interfaces
+REGEX="^[[:space:]]*iface[[:space:]](*.*)[[:space:]]*inet[[:space:]]*(dhcp|static)"
+EXCLUDES=""
+
+if grep -q -E $REGEX $INTERFACES; then
+        #echo "Not running dhcpcd because $INTERFACES"
+        #echo "defines some interfaces that will use a"
+        #echo "DHCP client or static address"
+        #exit 6
+        for iface in `grep -E $REGEX $INTERFACES | cut -f2 -d" "`
+        do
+                if [[ $EXCLUDES != "" ]]; then
+                        EXCLUDES="${EXCLUDES}|${iface}"
+                else
+                        EXCLUDES="${iface}"
+                fi
+        done
+        EXCLUDES="(${EXCLUDES})"
+fi
+
+exec $DHCPCD -Z $EXCLUDES $@