15 KiB
TORch pi-gen
A configurable Rasbian image with TORch installed (forked from pi-gen on GitHub)
Quick Start
- Create a
config
file in the project similar to the following:
IMG_NAME=RasbianTorch
KEYBOARD_KEYMAP="us"
LOCALE_DEFAULT="en_CA.UTF-8"
FIRST_USER_NAME=[USERNAME]
ENABLE_SSH=1
PUBKEY_SSH_FIRST_USER=[YOUR_SSH_PUBKEY]
PUBKEY_ONLY_SSH=1
STAGE_LIST="stage0 stage1 stage2"
- Build the image:
./build-docker.sh
After a nice, long build, a file named (something like) image_2020-10-07-RasbianTorch-lite.zip
will appear in the deploy/
directory.
-
Unzip this file to an
.img
file and flash it to an SD card -
Mount the
/boot
partition of the SD card and create a dir named/boot/torch
-
Copy your torch configuration files for this device into the
/boot/torch
dir (see torch-agent for details on configuration) -
Unmount the
/boot
partition and eject the SD card
Dependencies
pi-gen runs on Debian-based operating systems. Currently it is only supported on either Debian Buster or Ubuntu Xenial and is known to have issues building on earlier releases of these systems. On other Linux distributions it may be possible to use the Docker build described below.
To install the required dependencies for pi-gen
you should run:
apt-get install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
dosfstools bsdtar libcap2-bin grep rsync xz-utils file git curl bc
The file depends
contains a list of tools needed. The format of this
package is <tool>[:<debian-package>]
.
Config
Upon execution, build.sh
will source the file config
in the current
working directory. This bash shell fragment is intended to set needed
environment variables.
The following environment variables are supported:
-
IMG_NAME
required (Default: unset)The name of the image to build with the current stage directories. Setting
IMG_NAME=Raspbian
is logical for an unmodified RPi-Distro/pi-gen build, but you should use something else for a customized version. Export files in stages may add suffixes toIMG_NAME
. -
RELEASE
(Default: buster)The release version to build images against. Valid values are jessie, stretch buster, bullseye, and testing.
-
APT_PROXY
(Default: unset)If you require the use of an apt proxy, set it here. This proxy setting will not be included in the image, making it safe to use an
apt-cacher
or similar package for development.If you have Docker installed, you can set up a local apt caching proxy to like speed up subsequent builds like this:
docker-compose up -d echo 'APT_PROXY=http://172.17.0.1:3142' >> config
-
BASE_DIR
(Default: location ofbuild.sh
)CAUTION: Currently, changing this value will probably break build.sh
Top-level directory for
pi-gen
. Contains stage directories, build scripts, and by default both work and deployment directories. -
WORK_DIR
(Default:"$BASE_DIR/work"
)Directory in which
pi-gen
builds the target system. This value can be changed if you have a suitably large, fast storage location for stages to be built and cached. Note,WORK_DIR
stores a complete copy of the target system for each build stage, amounting to tens of gigabytes in the case of Raspbian.CAUTION: If your working directory is on an NTFS partition you probably won't be able to build: make sure this is a proper Linux filesystem.
-
DEPLOY_DIR
(Default:"$BASE_DIR/deploy"
)Output directory for target system images and NOOBS bundles.
-
DEPLOY_ZIP
(Default:1
)Setting to
0
will deploy the actual image (.img
) instead of a zipped image (.zip
). -
USE_QEMU
(Default:"0"
)Setting to '1' enables the QEMU mode - creating an image that can be mounted via QEMU for an emulated environment. These images include "-qemu" in the image file name.
-
LOCALE_DEFAULT
(Default: "en_GB.UTF-8" )Default system locale.
-
TARGET_HOSTNAME
(Default: "raspberrypi" )Setting the hostname to the specified value.
-
KEYBOARD_KEYMAP
(Default: "gb" )Default keyboard keymap.
To get the current value from a running system, run
debconf-show keyboard-configuration
and look at thekeyboard-configuration/xkb-keymap
value. -
KEYBOARD_LAYOUT
(Default: "English (UK)" )Default keyboard layout.
To get the current value from a running system, run
debconf-show keyboard-configuration
and look at thekeyboard-configuration/variant
value. -
TIMEZONE_DEFAULT
(Default: "Europe/London" )Default keyboard layout.
To get the current value from a running system, look in
/etc/timezone
. -
FIRST_USER_NAME
(Default: "pi" )Username for the first user
-
FIRST_USER_PASS
(Default: "raspberry")Password for the first user
-
WPA_ESSID
,WPA_PASSWORD
andWPA_COUNTRY
(Default: unset)If these are set, they are use to configure
wpa_supplicant.conf
, so that the Raspberry Pi can automatically connect to a wireless network on first boot. IfWPA_ESSID
is set andWPA_PASSWORD
is unset an unprotected wireless network will be configured. If set,WPA_PASSWORD
must be between 8 and 63 characters. -
ENABLE_SSH
(Default:0
)Setting to
1
will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you Raspberry Pi. -
PUBKEY_SSH_FIRST_USER
(Default: unset)
Setting this to a value will make that value the contents of the FIRST_USER_NAME's ~/.ssh/authorized_keys. Obviously the value should therefore be a valid authorized_keys file. Note that this does not automatically enable SSH.
-
PUBKEY_ONLY_SSH
(Default:0
) -
Setting to
1
will disable password authentication for SSH and enable public key authentication. Note that if SSH is not enabled this will take effect when SSH becomes enabled. -
STAGE_LIST
(Default:stage*
)If set, then instead of working through the numeric stages in order, this list will be followed. For example setting to
"stage0 stage1 mystage stage2"
will run the contents ofmystage
before stage2. Note that quotes are needed around the list. An absolute or relative path can be given for stages outside the pi-gen directory.
A simple example for building Raspbian:
IMG_NAME='Raspbian'
The config file can also be specified on the command line as an argument the build.sh
or build-docker.sh
scripts.
./build.sh -c myconfig
This is parsed after config
so can be used to override values set there.
How the build process works
The following process is followed to build images:
-
Loop through all of the stage directories in alphanumeric order
-
Move on to the next directory if this stage directory contains a file called "SKIP"
-
Run the script
prerun.sh
which is generally just used to copy the build directory between stages. -
In each stage directory loop through each subdirectory and then run each of the install scripts it contains, again in alphanumeric order. These need to be named with a two digit padded number at the beginning. There are a number of different files and directories which can be used to control different parts of the build process:
-
00-run.sh - A unix shell script. Needs to be made executable for it to run.
-
00-run-chroot.sh - A unix shell script which will be run in the chroot of the image build directory. Needs to be made executable for it to run.
-
00-debconf - Contents of this file are passed to debconf-set-selections to configure things like locale, etc.
-
00-packages - A list of packages to install. Can have more than one, space separated, per line.
-
00-packages-nr - As 00-packages, except these will be installed using the
--no-install-recommends -y
parameters to apt-get. -
00-patches - A directory containing patch files to be applied, using quilt. If a file named 'EDIT' is present in the directory, the build process will be interrupted with a bash session, allowing an opportunity to create/revise the patches.
-
-
If the stage directory contains files called "EXPORT_NOOBS" or "EXPORT_IMAGE" then add this stage to a list of images to generate
-
Generate the images for any stages that have specified them
It is recommended to examine build.sh for finer details.
Docker Build
Docker can be used to perform the build inside a container. This partially isolates the build from the host system, and allows using the script on non-debian based systems (e.g. Fedora Linux). The isolate is not complete due to the need to use some kernel level services for arm emulation (binfmt) and loop devices (losetup).
To build:
vi config # Edit your config file. See above.
./build-docker.sh
If everything goes well, your finished image will be in the deploy/
folder.
You can then remove the build container with docker rm -v pigen_work
If something breaks along the line, you can edit the corresponding scripts, and continue:
CONTINUE=1 ./build-docker.sh
To examine the container after a failure you can enter a shell within it using:
sudo docker run -it --privileged --volumes-from=pigen_work pi-gen /bin/bash
After successful build, the build container is by default removed. This may be undesired when making incremental changes to a customized build. To prevent the build script from remove the container add
PRESERVE_CONTAINER=1 ./build-docker.sh
There is a possibility that even when running from a docker container, the
installation of qemu-user-static
will silently fail when building the image
because binfmt-support
must be enabled on the underlying kernel. An easy
fix is to ensure binfmt-support
is installed on the host machine before
starting the ./build-docker.sh
script (or using your own docker build
solution).
Stage Anatomy
Raspbian Stage Overview
The build of Raspbian is divided up into several stages for logical clarity and modularity. This causes some initial complexity, but it simplifies maintenance and allows for more easy customization.
-
Stage 0 - bootstrap. The primary purpose of this stage is to create a usable filesystem. This is accomplished largely through the use of
debootstrap
, which creates a minimal filesystem suitable for use as a base.tgz on Debian systems. This stage also configures apt settings and installsraspberrypi-bootloader
which is missed by debootstrap. The minimal core is installed but not configured, and the system will not quite boot yet. -
Stage 1 - truly minimal system. This stage makes the system bootable by installing system files like
/etc/fstab
, configures the bootloader, makes the network operable, and installs packages like raspi-config. At this stage the system should boot to a local console from which you have the means to perform basic tasks needed to configure and install the system. This is as minimal as a system can possibly get, and its arguably not really usable yet in a traditional sense yet. Still, if you want minimal, this is minimal and the rest you could reasonably do yourself as sysadmin. -
Stage 2 - lite system. This stage produces the Raspbian-Lite image. It installs some optimized memory functions, sets timezone and charmap defaults, installs fake-hwclock and ntp, wireless LAN and bluetooth support, dphys-swapfile, and other basics for managing the hardware. It also creates necessary groups and gives the pi user access to sudo and the standard console hardware permission groups.
There are a few tools that may not make a whole lot of sense here for development purposes on a minimal system such as basic Python and Lua packages as well as the
build-essential
package. They are lumped right in with more essential packages presently, though they need not be with pi-gen. These are understandable for Raspbian's target audience, but if you were looking for something between truly minimal and Raspbian-Lite, here's where you start trimming. -
Stage 3 - desktop system. Here's where you get the full desktop system with X11 and LXDE, web browsers, git for development, Raspbian custom UI enhancements, etc. This is a base desktop system, with some development tools installed.
-
Stage 4 - Normal Raspbian image. System meant to fit on a 4GB card. This is the stage that installs most things that make Raspbian friendly to new users like system documentation.
-
Stage 5 - The Raspbian Full image. More development tools, an email client, learning tools like Scratch, specialized packages like sonic-pi, office productivity, etc.
Stage specification
If you wish to build up to a specified stage (such as building up to stage 2
for a lite system), place an empty file named SKIP
in each of the ./stage
directories you wish not to include.
Then add an empty file named SKIP_IMAGES
to ./stage4
and ./stage5
(if building up to stage 2) or
to ./stage2
(if building a minimal system).
# Example for building a lite system
echo "IMG_NAME='Raspbian'" > config
touch ./stage3/SKIP ./stage4/SKIP ./stage5/SKIP
touch ./stage4/SKIP_IMAGES ./stage5/SKIP_IMAGES
sudo ./build.sh # or ./build-docker.sh
If you wish to build further configurations upon (for example) the lite
system, you can also delete the contents of ./stage3
and ./stage4
and
replace with your own contents in the same format.
Skipping stages to speed up development
If you're working on a specific stage the recommended development process is as follows:
- Add a file called SKIP_IMAGES into the directories containing EXPORT_* files (currently stage2, stage4 and stage5)
- Add SKIP files to the stages you don't want to build. For example, if you're basing your image on the lite image you would add these to stages 3, 4 and 5.
- Run build.sh to build all stages
- Add SKIP files to the earlier successfully built stages
- Modify the last stage
- Rebuild just the last stage using
sudo CLEAN=1 ./build.sh
- Once you're happy with the image you can remove the SKIP_IMAGES files and export your image to test
Troubleshooting
64 Bit Systems
Please note there is currently an issue when compiling with a 64 Bit OS. See https://github.com/RPi-Distro/pi-gen/issues/271
binfmt_misc
Linux is able execute binaries from other architectures, meaning that it should be
possible to make use of pi-gen
on an x86_64 system, even though it will be running
ARM binaries. This requires support from the binfmt_misc
kernel module.
You may see the following error:
update-binfmts: warning: Couldn't load the binfmt_misc module.
To resolve this, ensure that the following files are available (install them if necessary):
/lib/modules/$(uname -r)/kernel/fs/binfmt_misc.ko
/usr/bin/qemu-arm-static
You may also need to load the module by hand - run modprobe binfmt_misc
.