TORch: Illuminating the Path to your Node

TORch is a solution for creating an SSH-via-Tor backdoor on a remote device as a means of fallback remote management and initial headless device configuration.

Description

Since Tor traffic easily crosses NAT boundries, this is a nice solution for

fallback connection to remote devices located on other LANs in the event that the network configuration on the remote side changes and the primary connection / VPN fails
the initial discovery and connection to a headless device like a Raspberry Pi on a local network which is configured via DHCP (use a pre-baked RPi image from torch-pi-gen)

A TORch solution consists of 3 processes:

torch-agent - Installed on remote machine; responsible for creating Tor hidden service and broadcasting the onion hostname an MQTT broker
MQTT broker - Any MQTT broker, reachable via IPv4 or Tor, through TLS or insecure communications
torch-subscriber - Listens for and handles onion hostname publications

Easily launch a TORch Node monitor service using the torch-subscriber-docker project

Installation

Install Package from Rudefox Debian Repo

Add the Rudefox Repo as an apt source
Install the torch-agent package

sudo apt install torch-agent

Build Debian Package from Source

If you don't already have a GPG key, generate one:

gpg --full-generate-key

Using the e-mail address you provided during GPG key generation, run build-deb.sh to build a Debian package and install it

./build-deb.sh john@doe.com
apt update && apt install build/torch-agent_0.0.6-1_all.deb

This will:

create a local user torch
install the TORch agent as a Systemd service named torch-agent
modify /etc/tor/torrc to activate control via the Tor Controller port

Configuration

The TORch agent will look for a torch.conf configuration in the configuration directory.

The configuation directory can be specified by

The TORCH_CONFIG_DIR environment variable
Using the --config-dir commandline option
Default: /etc/torch

A fully configured example can be found here

See the sample torch.conf file for additional configuration options and details

2.3 KiB Raw Permalink Blame History