Revert "Java 8 workaround"

This reverts commit 3682a747bd.

Dockerfile

@@ -5,8 +5,8 @@ ENV DEBIAN_FRONTEND noninteractive
 RUN apt-get -y update && \
     apt-get -y install \
         git vim parted \
-        quilt realpath qemu-user-static debootstrap zerofree pxz zip dosfstools \
-        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file \
+        quilt coreutils qemu-user-static debootstrap zerofree zip dosfstools \
+        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file kmod\
     && rm -rf /var/lib/apt/lists/*
 
 COPY . /pi-gen/

README.md

@@ -7,12 +7,13 @@ _Tool used to create the raspberrypi.org Raspbian images_
 
 pi-gen runs on Debian based operating systems. Currently it is only supported on
 either Debian Stretch or Ubuntu Xenial and is known to have issues building on
-earlier releases of these systems.
+earlier releases of these systems. On other Linux distributions it may be possible
+to use the Docker build described below.
 
 To install the required dependencies for pi-gen you should run:
 
 ```bash
-apt-get install quilt parted realpath qemu-user-static debootstrap zerofree pxz zip \
+apt-get install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
 dosfstools bsdtar libcap2-bin grep rsync xz-utils file git curl
 ```
 
@@ -68,11 +69,34 @@ The following environment variables are supported:
 
    Output directory for target system images and NOOBS bundles.
 
+ * `DEPLOY_ZIP` (Default: `1`)
+
+   Setting to `0` will deploy the actual image (`.img`) instead of a zipped image (`.zip`).
+
  * `USE_QEMU` (Default: `"0"`)
 
    Setting to '1' enables the QEMU mode - creating an image that can be mounted via QEMU for an emulated
    environment. These images include "-qemu" in the image file name.
 
+ * `FIRST_USER_NAME` (Default: "pi" )
+
+   Username for the first user
+
+ * `FIRST_USER_PASS` (Default: "raspberry")
+
+   Password for the first user
+
+ * `WPA_ESSID`, `WPA_PASSWORD` and `WPA_COUNTRY` (Default: unset)
+
+   If these are set, they are use to configure `wpa_supplicant.conf`, so that the raspberry pi can automatically connect to a wifi network on first boot.
+
+ * `ENABLE_SSH` (Default: `0`)
+
+   Setting to `1` will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you RaspberryPi.
+
+ * `STAGE_LIST` (Default: `stage*`)
+
+    If set, then instead of working through the numeric stages in order, this list will be followed. For example setting to `"stage0 stage1 mystage stage2"` will run the contents of `mystage` before stage2. Note that quotes are needed around the list. An absolute or relative path can be given for stages outside the pi-gen directory.
 
 A simple example for building Raspbian:
 
@@ -80,6 +104,13 @@ A simple example for building Raspbian:
 IMG_NAME='Raspbian'
 ```
 
+The config file can also be specified on the command line as an argument the `build.sh` or `build-docker.sh` scripts.
+
+```
+./build.sh -c myconfig
+```
+
+This is parsed after `config` so can be used to override values set there.
 
 ## How the build process works
 
@@ -128,6 +159,13 @@ It is recommended to examine build.sh for finer details.
 
 ## Docker Build
 
+Docker can be used to perform the build inside a container. This partially isolates
+the build from the host system, and allows using the script on non-debian based
+systems (e.g. Fedora Linux). The isolate is not complete due to the need to use
+some kernel level services for arm emulation (binfmt) and loop devices (losetup).
+
+To build:
+
 ```bash
 vi config         # Edit your config file. See above.
 ./build-docker.sh
@@ -143,6 +181,12 @@ continue:
 CONTINUE=1 ./build-docker.sh
 ```
 
+To examine the container after a failure you can enter a shell within it using:
+
+```bash
+sudo docker run -it --privileged --volumes-from=pigen_work pi-gen /bin/bash
+```
+
 After successful build, the build container is by default removed. This may be undesired when making incremental changes to a customized build. To prevent the build script from remove the container add
 
 ```bash

build-docker.sh

@@ -1,9 +1,10 @@
 #!/bin/bash -e
 
+BUILD_OPTS="$*"
+
 DOCKER="docker"
 set +e
-$DOCKER ps >/dev/null 2>&1
-if [ $? != 0 ]; then
+if ! $DOCKER ps >/dev/null 2>&1; then
 	DOCKER="sudo docker"
 fi
 if ! $DOCKER ps >/dev/null; then
@@ -13,30 +14,31 @@ if ! $DOCKER ps >/dev/null; then
 fi
 set -e
 
-config_file=()
 if [ -f config ]; then
-	config_file=("--env-file" "$(pwd)/config")
+	# shellcheck disable=SC1091
 	source config
 fi
 
+while getopts "c:" flag
+do
+	case "$flag" in
+		c)
+			# shellcheck disable=SC1090
+			source "$OPTARG"
+			;;
+		*)
+			;;
+	esac
+done
+
 CONTAINER_NAME=${CONTAINER_NAME:-pigen_work}
 CONTINUE=${CONTINUE:-0}
 PRESERVE_CONTAINER=${PRESERVE_CONTAINER:-0}
 
-if [ "$*" != "" ] || [ -z "${IMG_NAME}" ]; then
-	if [ -z "${IMG_NAME}" ]; then
-		echo "IMG_NAME not set in 'config'" 1>&2
-		echo 1>&2
-	fi
-	cat >&2 <<EOF
-Usage:
-    build-docker.sh [options]
-Optional environment arguments: ( =<default> )
-    CONTAINER_NAME=pigen_work  set a name for the build container
-    CONTINUE=1                 continue from a previously started container
-    PRESERVE_CONTAINER=1       keep build container even on successful build
-EOF
-	exit 1
+if [ -z "${IMG_NAME}" ]; then
+	echo "IMG_NAME not set in 'config'" 1>&2
+	echo 1>&2
+exit 1
 fi
 
 CONTAINER_EXISTS=$($DOCKER ps -a --filter name="$CONTAINER_NAME" -q)
@@ -54,23 +56,20 @@ fi
 
 $DOCKER build -t pi-gen .
 if [ "$CONTAINER_EXISTS" != "" ]; then
-	trap "echo 'got CTRL+C... please wait 5s'; $DOCKER stop -t 5 ${CONTAINER_NAME}_cont" SIGINT SIGTERM
+	trap 'echo "got CTRL+C... please wait 5s"; $DOCKER stop -t 5 ${CONTAINER_NAME}_cont' SIGINT SIGTERM
 	time $DOCKER run --rm --privileged \
 		--volumes-from="${CONTAINER_NAME}" --name "${CONTAINER_NAME}_cont" \
-		-e IMG_NAME="${IMG_NAME}"\
 		pi-gen \
 		bash -e -o pipefail -c "dpkg-reconfigure qemu-user-static &&
-	cd /pi-gen; ./build.sh;
+	cd /pi-gen; ./build.sh ${BUILD_OPTS} ;
 	rsync -av work/*/build.log deploy/" &
 	wait "$!"
 else
-	trap "echo 'got CTRL+C... please wait 5s'; $DOCKER stop -t 5 ${CONTAINER_NAME}" SIGINT SIGTERM
+	trap 'echo "got CTRL+C... please wait 5s"; $DOCKER stop -t 5 ${CONTAINER_NAME}' SIGINT SIGTERM
 	time $DOCKER run --name "${CONTAINER_NAME}" --privileged \
-		-e IMG_NAME="${IMG_NAME}"\
-		"${config_file[@]}" \
 		pi-gen \
 		bash -e -o pipefail -c "dpkg-reconfigure qemu-user-static &&
-	cd /pi-gen; ./build.sh &&
+	cd /pi-gen; ./build.sh ${BUILD_OPTS} &&
 	rsync -av work/*/build.log deploy/" &
 	wait "$!"
 fi
@@ -80,7 +79,7 @@ ls -lah deploy
 
 # cleanup
 if [ "$PRESERVE_CONTAINER" != "1" ]; then
-	$DOCKER rm -v $CONTAINER_NAME
+	$DOCKER rm -v "$CONTAINER_NAME"
 fi
 
 echo "Done! Your image(s) should be in deploy/"

build.sh

@@ -1,5 +1,5 @@
 #!/bin/bash -e
-# shellcheck disable=SC2119,SC1091
+# shellcheck disable=SC2119
 run_sub_stage()
 {
 	log "Begin ${SUB_STAGE_DIR}"
@@ -46,11 +46,11 @@ EOF
 			SUB_STAGE_QUILT_PATCH_DIR="$(basename "$SUB_STAGE_DIR")-pc"
 			mkdir -p "$SUB_STAGE_QUILT_PATCH_DIR"
 			ln -snf "$SUB_STAGE_QUILT_PATCH_DIR" .pc
+			quilt upgrade
 			if [ -e "${SUB_STAGE_DIR}/${i}-patches/EDIT" ]; then
 				echo "Dropping into bash to edit patches..."
 				bash
 			fi
-			quilt upgrade
 			RC=0
 			quilt push -a || RC=$?
 			case "$RC" in
@@ -102,7 +102,7 @@ run_stage(){
 			./prerun.sh
 			log "End ${STAGE_DIR}/prerun.sh"
 		fi
-		for SUB_STAGE_DIR in ${STAGE_DIR}/*; do
+		for SUB_STAGE_DIR in "${STAGE_DIR}"/*; do
 			if [ -d "${SUB_STAGE_DIR}" ] &&
 			   [ ! -f "${SUB_STAGE_DIR}/SKIP" ]; then
 				run_sub_stage
@@ -124,9 +124,26 @@ fi
 
 
 if [ -f config ]; then
+	# shellcheck disable=SC1091
 	source config
 fi
 
+while getopts "c:" flag
+do
+	case "$flag" in
+		c)
+			EXTRA_CONFIG="$OPTARG"
+			# shellcheck disable=SC1090
+			source "$EXTRA_CONFIG"
+			;;
+		*)
+			;;
+	esac
+done
+
+export PI_GEN=${PI_GEN:-pi-gen}
+export PI_GEN_REPO=${PI_GEN_REPO:-https://github.com/RPi-Distro/pi-gen}
+
 if [ -z "${IMG_NAME}" ]; then
 	echo "IMG_NAME not set" 1>&2
 	exit 1
@@ -134,13 +151,23 @@ fi
 
 export USE_QEMU="${USE_QEMU:-0}"
 export IMG_DATE="${IMG_DATE:-"$(date +%Y-%m-%d)"}"
+export IMG_FILENAME="${IMG_FILENAME:-"${IMG_DATE}-${IMG_NAME}"}"
+export ZIP_FILENAME="${ZIP_FILENAME:-"image_${IMG_DATE}-${IMG_NAME}"}"
 
 BASE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 export SCRIPT_DIR="${BASE_DIR}/scripts"
 export WORK_DIR="${WORK_DIR:-"${BASE_DIR}/work/${IMG_DATE}-${IMG_NAME}"}"
 export DEPLOY_DIR=${DEPLOY_DIR:-"${BASE_DIR}/deploy"}
+export DEPLOY_ZIP="${DEPLOY_ZIP:-1}"
 export LOG_FILE="${WORK_DIR}/build.log"
 
+export FIRST_USER_NAME=${FIRST_USER_NAME:-pi}
+export FIRST_USER_PASS=${FIRST_USER_PASS:-raspberry}
+export WPA_ESSID
+export WPA_PASSWORD
+export WPA_COUNTRY
+export ENABLE_SSH="${ENABLE_SSH:-0}"
+
 export BASE_DIR
 
 export CLEAN
@@ -170,13 +197,26 @@ source "${SCRIPT_DIR}/common"
 # shellcheck source=scripts/dependencies_check
 source "${SCRIPT_DIR}/dependencies_check"
 
+#check username is valid
+if [[ ! "$FIRST_USER_NAME" =~ ^[a-z][-a-z0-9_]*$ ]]; then
+	echo "Invalid FIRST_USER_NAME: $FIRST_USER_NAME"
+	exit 1
+fi
+
+if [[ -n "${APT_PROXY}" ]] && ! curl --silent "${APT_PROXY}" >/dev/null ; then
+	echo "Could not reach APT_PROXY server: ${APT_PROXY}"
+	exit 1
+fi
 
 dependencies_check "${BASE_DIR}/depends"
 
 mkdir -p "${WORK_DIR}"
 log "Begin ${BASE_DIR}"
 
-for STAGE_DIR in "${BASE_DIR}/stage"*; do
+STAGE_LIST=${STAGE_LIST:-${BASE_DIR}/stage*}
+
+for STAGE_DIR in $STAGE_LIST; do
+	STAGE_DIR=$(realpath "${STAGE_DIR}")
 	run_stage
 done
 

depends

@@ -1,10 +1,10 @@
 quilt
 parted
-realpath
+realpath:coreutils
 qemu-arm-static:qemu-user-static
 debootstrap
 zerofree
-pxz zip
+zip
 mkdosfs:dosfstools
 capsh:libcap2-bin
 bsdtar
@@ -15,3 +15,4 @@ curl
 xxd
 file
 git
+lsmod:kmod

export-image/00-allow-rerun/00-run.sh

@@ -3,3 +3,7 @@
 if [ ! -x "${ROOTFS_DIR}/usr/bin/qemu-arm-static" ]; then
 	cp /usr/bin/qemu-arm-static "${ROOTFS_DIR}/usr/bin/"
 fi
+
+if [ -e "${ROOTFS_DIR}/etc/ld.so.preload" ]; then
+	mv "${ROOTFS_DIR}/etc/ld.so.preload" "${ROOTFS_DIR}/etc/ld.so.preload.disabled"
+fi

export-image/01-set-sources/00-patches/0-sources.diff

@@ -1,9 +0,0 @@
-Index: export-jessie/rootfs/etc/apt/sources.list.d/raspi.list
-===================================================================
---- export-jessie.orig/rootfs/etc/apt/sources.list.d/raspi.list
-+++ export-jessie/rootfs/etc/apt/sources.list.d/raspi.list
-@@ -1,3 +1,3 @@
--deb http://archive.raspberrypi.org/debian/ stretch main ui staging
-+deb http://archive.raspberrypi.org/debian/ stretch main ui
- # Uncomment line below then 'apt-get update' to enable 'apt-get source'
- #deb-src http://archive.raspberrypi.org/debian/ stretch main ui

export-image/01-set-sources/00-patches/series

@@ -1 +0,0 @@
-0-sources.diff

export-image/03-set-partuuid/00-run.sh

@@ -1,6 +1,6 @@
 #!/bin/bash -e
 
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.img"
+IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
 
 IMGID="$(dd if="${IMG_FILE}" skip=440 bs=1 count=4 2>/dev/null | xxd -e | cut -f 2 -d' ')"
 

export-image/04-finalise/01-run.sh

@@ -1,20 +1,28 @@
 #!/bin/bash -e
 
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.img"
-INFO_FILE="${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.info"
+IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
+INFO_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.info"
 
 on_chroot << EOF
 /etc/init.d/fake-hwclock stop
 hardlink -t /usr/share/doc
 EOF
 
-if [ -d "${ROOTFS_DIR}/home/pi/.config" ]; then
-	chmod 700 "${ROOTFS_DIR}/home/pi/.config"
+if [ -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.config" ]; then
+	chmod 700 "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.config"
 fi
 
 rm -f "${ROOTFS_DIR}/etc/apt/apt.conf.d/51cache"
 rm -f "${ROOTFS_DIR}/usr/bin/qemu-arm-static"
 
+if [ "${USE_QEMU}" != "1" ]; then
+	if [ -e "${ROOTFS_DIR}/etc/ld.so.preload.disabled" ]; then
+		mv "${ROOTFS_DIR}/etc/ld.so.preload.disabled" "${ROOTFS_DIR}/etc/ld.so.preload"
+	fi
+fi
+
+rm -f "${ROOTFS_DIR}/etc/network/interfaces.dpkg-old"
+
 rm -f "${ROOTFS_DIR}/etc/apt/sources.list~"
 rm -f "${ROOTFS_DIR}/etc/apt/trusted.gpg~"
 
@@ -43,24 +51,24 @@ rm -f "${ROOTFS_DIR}/etc/vnc/updateid"
 
 update_issue "$(basename "${EXPORT_DIR}")"
 install -m 644 "${ROOTFS_DIR}/etc/rpi-issue" "${ROOTFS_DIR}/boot/issue.txt"
-install files/LICENSE.oracle "${ROOTFS_DIR}/boot/"
-
 
 cp "$ROOTFS_DIR/etc/rpi-issue" "$INFO_FILE"
 
 
 {
-	firmware=$(zgrep "firmware as of" \
-		"$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" | \
-		head -n1 | sed  -n 's|.* \([^ ]*\)$|\1|p')
-	printf "\nFirmware: https://github.com/raspberrypi/firmware/tree/%s\n" "$firmware"
+	if [ -f "$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" ]; then
+		firmware=$(zgrep "firmware as of" \
+			"$ROOTFS_DIR/usr/share/doc/raspberrypi-kernel/changelog.Debian.gz" | \
+			head -n1 | sed  -n 's|.* \([^ ]*\)$|\1|p')
+		printf "\nFirmware: https://github.com/raspberrypi/firmware/tree/%s\n" "$firmware"
 
-	kernel="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/git_hash")"
-	printf "Kernel: https://github.com/raspberrypi/linux/tree/%s\n" "$kernel"
+		kernel="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/git_hash")"
+		printf "Kernel: https://github.com/raspberrypi/linux/tree/%s\n" "$kernel"
 
-	uname="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/uname_string7")"
+		uname="$(curl -s -L "https://github.com/raspberrypi/firmware/raw/$firmware/extra/uname_string7")"
+		printf "Uname string: %s\n" "$uname"
+	fi
 
-	printf "Uname string: %s\n" "$uname"
 	printf "\nPackages:\n"
 	dpkg -l --root "$ROOTFS_DIR"
 } >> "$INFO_FILE"
@@ -68,17 +76,22 @@ cp "$ROOTFS_DIR/etc/rpi-issue" "$INFO_FILE"
 ROOT_DEV="$(mount | grep "${ROOTFS_DIR} " | cut -f1 -d' ')"
 
 unmount "${ROOTFS_DIR}"
-zerofree -v "${ROOT_DEV}"
+zerofree "${ROOT_DEV}"
 
 unmount_image "${IMG_FILE}"
 
 mkdir -p "${DEPLOY_DIR}"
 
-rm -f "${DEPLOY_DIR}/image_${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.zip"
+rm -f "${DEPLOY_DIR}/${ZIP_FILENAME}${IMG_SUFFIX}.zip"
+rm -f "${DEPLOY_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
 
-pushd "${STAGE_WORK_DIR}" > /dev/null
-zip "${DEPLOY_DIR}/image_${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.zip" \
-	"$(basename "${IMG_FILE}")"
-popd > /dev/null
+if [ "${DEPLOY_ZIP}" == "1" ]; then
+	pushd "${STAGE_WORK_DIR}" > /dev/null
+	zip "${DEPLOY_DIR}/${ZIP_FILENAME}${IMG_SUFFIX}.zip" \
+		"$(basename "${IMG_FILE}")"
+	popd > /dev/null
+else
+	cp "$IMG_FILE" "$DEPLOY_DIR"
+fi
 
 cp "$INFO_FILE" "$DEPLOY_DIR"

export-image/04-finalise/files/LICENSE.oracle

@@ -1,72 +0,0 @@
-Taken from http://www.java.com/license
-
-Oracle Binary Code License Agreement for the Java SE Platform Products and JavaFX
-
-ORACLE AMERICA, INC. ("ORACLE"), FOR AND ON BEHALF OF ITSELF AND ITS SUBSIDIARIES AND AFFILIATES UNDER COMMON CONTROL, IS WILLING TO LICENSE THE SOFTWARE TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS BINARY CODE LICENSE AGREEMENT AND SUPPLEMENTAL LICENSE TERMS (COLLECTIVELY "AGREEMENT"). PLEASE READ THE AGREEMENT CAREFULLY. BY SELECTING THE "ACCEPT LICENSE AGREEMENT" (OR THE EQUIVALENT) BUTTON AND/OR BY USING THE SOFTWARE YOU ACKNOWLEDGE THAT YOU HAVE READ THE TERMS AND AGREE TO THEM. IF YOU ARE AGREEING TO THESE TERMS ON BEHALF OF A COMPANY OR OTHER LEGAL ENTITY, YOU REPRESENT THAT YOU HAVE THE LEGAL AUTHORITY TO BIND THE LEGAL ENTITY TO THESE TERMS. IF YOU DO NOT HAVE SUCH AUTHORITY, OR IF YOU DO NOT WISH TO BE BOUND BY THE TERMS, THEN SELECT THE "DECLINE LICENSE AGREEMENT" (OR THE EQUIVALENT) BUTTON AND YOU MUST NOT USE THE SOFTWARE ON THIS SITE OR ANY OTHER MEDIA ON WHICH THE SOFTWARE IS CONTAINED.
-
-1. DEFINITIONS. "Software" means the software identified above in binary form that you selected for download, install or use (in the version You selected for download, install or use) from Oracle or its authorized licensees, any other machine readable materials (including, but not limited to, libraries, source files, header files, and data files), any updates or error corrections provided by Oracle, and any user manuals, programming guides and other documentation provided to you by Oracle under this Agreement. "General Purpose Desktop Computers and Servers" means computers, including desktop and laptop computers, or servers, used for general computing functions under end user control (such as but not specifically limited to email, general purpose Internet browsing, and office suite productivity tools). The use of Software in systems and solutions that provide dedicated functionality (other than as mentioned above) or designed for use in embedded or function-specific software applications, for example but not limited to: Software embedded in or bundled with industrial control systems, wireless mobile telephones, wireless handheld devices, kiosks, TV/STB, Blu-ray Disc devices, telematics and network control switching equipment, printers and storage management systems, and other related systems are excluded from this definition and not licensed under this Agreement. "Programs" means (a) Java technology applets and applications intended to run on the Java Platform, Standard Edition platform on Java-enabled General Purpose Desktop Computers and Servers; and (b) JavaFX technology applications intended to run on the JavaFX Runtime on JavaFX-enabled General Purpose Desktop Computers and Servers. “Commercial Features” means those features identified in Table 1-1 (Commercial Features In Java SE Product Editions) of the Java SE documentation accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html. “README File” means the README file for the Software accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html.
-
-2. LICENSE TO USE. Subject to the terms and conditions of this Agreement including, but not limited to, the Java Technology Restrictions of the Supplemental License Terms, Oracle grants you a non-exclusive, non-transferable, limited license without license fees to reproduce and use internally the Software complete and unmodified for the sole purpose of running Programs. THE LICENSE SET FORTH IN THIS SECTION 2 DOES NOT EXTEND TO THE COMMERCIAL FEATURES. YOUR RIGHTS AND OBLIGATIONS RELATED TO THE COMMERCIAL FEATURES ARE AS SET FORTH IN THE SUPPLEMENTAL TERMS ALONG WITH ADDITIONAL LICENSES FOR DEVELOPERS AND PUBLISHERS.
-
-3. RESTRICTIONS. Software is copyrighted. Title to Software and all associated intellectual property rights is retained by Oracle and/or its licensors. Unless enforcement is prohibited by applicable law, you may not modify, decompile, or reverse engineer Software. You acknowledge that the Software is developed for general use in a variety of information management applications; it is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use the Software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle disclaims any express or implied warranty of fitness for such uses. No right, title or interest in or to any trademark, service mark, logo or trade name of Oracle or its licensors is granted under this Agreement. Additional restrictions for developers and/or publishers licenses are set forth in the Supplemental License Terms.
-
-4. DISCLAIMER OF WARRANTY. THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. ORACLE FURTHER DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-
-5. LIMITATION OF LIABILITY. IN NO EVENT SHALL ORACLE BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF ORACLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ORACLE'S ENTIRE LIABILITY FOR DAMAGES HEREUNDER SHALL IN NO EVENT EXCEED ONE THOUSAND DOLLARS (U.S. $1,000).
-
-6. TERMINATION. This Agreement is effective until terminated. You may terminate this Agreement at any time by destroying all copies of Software. This Agreement will terminate immediately without notice from Oracle if you fail to comply with any provision of this Agreement. Either party may terminate this Agreement immediately should any Software become, or in either party's opinion be likely to become, the subject of a claim of infringement of any intellectual property right. Upon termination, you must destroy all copies of Software.
-
-7. EXPORT REGULATIONS. You agree that U.S. export control laws and other applicable export and import laws govern your use of the Software, including technical data; additional information can be found on Oracle's Global Trade Compliance web site (http://www.oracle.com/products/export). You agree that neither the Software nor any direct product thereof will be exported, directly, or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation.
-
-8. TRADEMARKS AND LOGOS. You acknowledge and agree as between you
-and Oracle that Oracle owns the ORACLE and JAVA trademarks and all ORACLE- and JAVA-related trademarks, service marks, logos and other brand
-designations ("Oracle Marks"), and you agree to comply with the Third
-Party Usage Guidelines for Oracle Trademarks currently located at
-http://www.oracle.com/us/legal/third-party-trademarks/index.html . Any use you make of the Oracle Marks inures to Oracle's benefit.
-
-9. U.S. GOVERNMENT LICENSE RIGHTS. If Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or subcontractor (at any tier), then the Government's rights in Software and accompanying documentation shall be only those set forth in this Agreement.
-
-10. GOVERNING LAW. This agreement is governed by the substantive and procedural laws of California. You and Oracle agree to submit to the exclusive jurisdiction of, and venue in, the courts of San Francisco, or Santa Clara counties in California in any dispute arising out of or relating to this agreement.
-
-11. SEVERABILITY. If any provision of this Agreement is held to be unenforceable, this Agreement will remain in effect with the provision omitted, unless omission would frustrate the intent of the parties, in which case this Agreement will immediately terminate.
-
-12. INTEGRATION. This Agreement is the entire agreement between you and Oracle relating to its subject matter. It supersedes all prior or contemporaneous oral or written communications, proposals, representations and warranties and prevails over any conflicting or additional terms of any quote, order, acknowledgment, or other communication between the parties relating to its subject matter during the term of this Agreement. No modification of this Agreement will be binding, unless in writing and signed by an authorized representative of each party.
-
-SUPPLEMENTAL LICENSE TERMS
-
-These Supplemental License Terms add to or modify the terms of the Binary Code License Agreement. Capitalized terms not defined in these Supplemental Terms shall have the same meanings ascribed to them in the Binary Code License Agreement. These Supplemental Terms shall supersede any inconsistent or conflicting terms in the Binary Code License Agreement, or in any license contained within the Software.
-
-A. COMMERCIAL FEATURES. You may not use the Commercial Features for running Programs, Java applets or applications in your internal business operations or for any commercial or production purpose, or for any purpose other than as set forth in Sections B, C, D and E of these Supplemental Terms. If You want to use the Commercial Features for any purpose other than as permitted in this Agreement, You must obtain a separate license from Oracle.
-
-B. SOFTWARE INTERNAL USE FOR DEVELOPMENT LICENSE GRANT. Subject to the terms and conditions of this Agreement and restrictions and exceptions set forth in the README File incorporated herein by reference, including, but not limited to the Java Technology Restrictions of these Supplemental Terms, Oracle grants you a non-exclusive, non-transferable, limited license without fees to reproduce internally and use internally the Software complete and unmodified for the purpose of designing, developing, and testing your Programs.
-
-C. LICENSE TO DISTRIBUTE SOFTWARE. Subject to the terms and conditions of this Agreement and restrictions and exceptions set forth in the README File, including, but not limited to the Java Technology Restrictions and Limitations on Redistribution of these Supplemental Terms, Oracle grants you a non-exclusive, non-transferable, limited license without fees to reproduce and distribute the Software, provided that (i) you distribute the Software complete and unmodified and only bundled as part of, and for the sole purpose of running, your Programs, (ii) the Programs add significant and primary functionality to the Software, (iii) you do not distribute additional software intended to replace any component(s) of the Software, (iv) you do not remove or alter any proprietary legends or notices contained in the Software, (v) you only distribute the Software subject to a license agreement that: (a) is a complete, unmodified reproduction of this Agreement; or (b) protects Oracle's interests consistent with the terms contained in this Agreement and that includes the notice set forth in Section H, and (vi) you agree to defend and indemnify Oracle and its licensors from and against any damages, costs, liabilities, settlement amounts and/or expenses (including attorneys' fees) incurred in connection with any claim, lawsuit or action by any third party that arises or results from the use or distribution of any and all Programs and/or Software. The license set forth in this Section C does not extend to the Software identified in Section G.
-
-D. LICENSE TO DISTRIBUTE REDISTRIBUTABLES. Subject to the terms and conditions of this Agreement and restrictions and exceptions set forth in the README File, including but not limited to the Java Technology Restrictions and Limitations on Redistribution of these Supplemental Terms, Oracle grants you a non-exclusive, non-transferable, limited license without fees to reproduce and distribute those files specifically identified as redistributable in the README File ("Redistributables") provided that: (i) you distribute the Redistributables complete and unmodified, and only bundled as part of Programs, (ii) the Programs add significant and primary functionality to the Redistributables, (iii) you do not distribute additional software intended to supersede any component(s) of the Redistributables (unless otherwise specified in the applicable README File), (iv) you do not remove or alter any proprietary legends or notices contained in or on the Redistributables, (v) you only distribute the Redistributables pursuant to a license agreement that: (a) is a complete, unmodified reproduction of this Agreement; or (b) protects Oracle's interests consistent with the terms contained in the Agreement and includes the notice set forth in Section H, (vi) you agree to defend and indemnify Oracle and its licensors from and against any damages, costs, liabilities, settlement amounts and/or expenses (including attorneys' fees) incurred in connection with any claim, lawsuit or action by any third party that arises or results from the use or distribution of any and all Programs and/or Software. The license set forth in this Section D does not extend to the Software identified in Section G.
-
-E. DISTRIBUTION BY PUBLISHERS. This section pertains to your distribution of the JavaTM SE Development Kit Software (“JDK”) with your printed book or magazine (as those terms are commonly used in the industry) relating to Java technology ("Publication"). Subject to and conditioned upon your compliance with the restrictions and obligations contained in the Agreement, Oracle hereby grants to you a non-exclusive, nontransferable limited right to reproduce complete and unmodified copies of the JDK on electronic media (the "Media") for the sole purpose of inclusion and distribution with your Publication(s), subject to the following terms: (i) You may not distribute the JDK on a stand-alone basis; it must be distributed with your Publication(s); (ii) You are responsible for downloading the JDK from the applicable Oracle web site; (iii) You must refer to the JDK as JavaTM SE Development Kit; (iv) The JDK must be reproduced in its entirety and without any modification whatsoever (including with respect to all proprietary notices) and distributed with your Publication subject to a license agreement that is a complete, unmodified reproduction of this Agreement; (v) The Media label shall include the following information: “Copyright [YEAR], Oracle America, Inc. All rights reserved. Use is subject to license terms. ORACLE and JAVA trademarks and all ORACLE- and JAVA-related trademarks, service marks, logos and other brand designations are trademarks or registered trademarks of Oracle in the U.S. and other countries.” [YEAR] is the year of Oracle's release of the Software; the year information can typically be found in the Software’s “About” box or screen. This information must be placed on the Media label in such a manner as to only apply to the JDK; (vi) You must clearly identify the JDK as Oracle's product on the Media holder or Media label, and you may not state or imply that Oracle is responsible for any third-party software contained on the Media; (vii) You may not include any third party software on the Media which is intended to be a replacement or substitute for the JDK; (viii) You agree to defend and indemnify Oracle and its licensors from and against any damages, costs, liabilities, settlement amounts and/or expenses (including attorneys' fees) incurred in connection with any claim, lawsuit or action by any third party that arises or results from the use or distribution of the JDK and/or the Publication; ; and (ix) You shall provide Oracle with a written notice for each Publication; such notice shall include the following information: (1) title of Publication, (2) author(s), (3) date of Publication, and (4) ISBN or ISSN numbers. Such notice shall be sent to Oracle America, Inc., 500 Oracle Parkway, Redwood Shores, California 94065 U.S.A , Attention: General Counsel.
-
-F. JAVA TECHNOLOGY RESTRICTIONS. You may not create, modify, or change the behavior of, or authorize your licensees to create, modify, or change the behavior of, classes, interfaces, or subpackages that are in any way identified as "java", "javax", "sun", “oracle” or similar convention as specified by Oracle in any naming convention designation.
-
-G. LIMITATIONS ON REDISTRIBUTION. You may not redistribute or otherwise transfer patches, bug fixes or updates made available by Oracle through Oracle Premier Support, including those made available under Oracle's Java SE Support program.
-
-H. COMMERCIAL FEATURES NOTICE. For purpose of complying with Supplemental Term Section C.(v)(b) and D.(v)(b), your license agreement shall include the following notice, where the notice is displayed in a manner that anyone using the Software will see the notice:
-
-Use of the Commercial Features for any commercial or production purpose requires a separate license from Oracle. “Commercial Features” means those features identified Table 1-1 (Commercial Features In Java SE Product Editions) of the Java SE documentation accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html
-
- 
-
-I. SOURCE CODE. Software may contain source code that, unless expressly licensed for other purposes, is provided solely for reference purposes pursuant to the terms of this Agreement. Source code may not be redistributed unless expressly provided for in this Agreement.
-
-J. THIRD PARTY CODE. Additional copyright notices and license terms applicable to portions of the Software are set forth in the THIRDPARTYLICENSEREADME file accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html. In addition to any terms and conditions of any third party opensource/freeware license identified in the THIRDPARTYLICENSEREADME file, the disclaimer of warranty and limitation of liability provisions in paragraphs 4 and 5 of the Binary Code License Agreement shall apply to all Software in this distribution.
-
-K. TERMINATION FOR INFRINGEMENT. Either party may terminate this Agreement immediately should any Software become, or in either party's opinion be likely to become, the subject of a claim of infringement of any intellectual property right.
-
-L. INSTALLATION AND AUTO-UPDATE. The Software's installation and auto-update processes transmit a limited amount of data to Oracle (or its service provider) about those specific processes to help Oracle understand and optimize them. Oracle does not associate the data with personally identifiable information. You can find more information about the data Oracle collects as a result of your Software download at http://www.oracle.com/technetwork/java/javase/documentation/index.html.
-
-For inquiries please contact: Oracle America, Inc., 500 Oracle Parkway,
-
-Redwood Shores, California 94065, USA.
-
-Last updated 02 April 2013
-

export-image/prerun.sh

@@ -1,6 +1,6 @@
 #!/bin/bash -e
 
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.img"
+IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
 
 unmount_image "${IMG_FILE}"
 
@@ -9,11 +9,11 @@ rm -f "${IMG_FILE}"
 rm -rf "${ROOTFS_DIR}"
 mkdir -p "${ROOTFS_DIR}"
 
-BOOT_SIZE=$(du --apparent-size -s "${EXPORT_ROOTFS_DIR}/boot" --block-size=1 | cut -f 1)
+BOOT_SIZE="$((256 * 1024 * 1024))"
 TOTAL_SIZE=$(du --apparent-size -s "${EXPORT_ROOTFS_DIR}" --exclude var/cache/apt/archives --block-size=1 | cut -f 1)
 
 ROUND_SIZE="$((4 * 1024 * 1024))"
-ROUNDED_ROOT_SECTOR=$(((2 * BOOT_SIZE + ROUND_SIZE) / ROUND_SIZE * ROUND_SIZE / 512 + 8192))
+ROUNDED_ROOT_SECTOR=$(((BOOT_SIZE + ROUND_SIZE) / ROUND_SIZE * ROUND_SIZE / 512 + 8192))
 IMG_SIZE=$(((BOOT_SIZE + TOTAL_SIZE + (800 * 1024 * 1024) + ROUND_SIZE - 1) / ROUND_SIZE * ROUND_SIZE))
 
 truncate -s "${IMG_SIZE}" "${IMG_FILE}"
@@ -23,7 +23,7 @@ n
 
 
 8192
-+$((BOOT_SIZE * 2 /512))
++$((BOOT_SIZE / 512))
 p
 t
 c
@@ -37,16 +37,12 @@ p
 w
 EOF
 
-PARTED_OUT=$(parted -s "${IMG_FILE}" unit b print)
-BOOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^ 1'| xargs echo -n \
-| cut -d" " -f 2 | tr -d B)
-BOOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^ 1'| xargs echo -n \
-| cut -d" " -f 4 | tr -d B)
+PARTED_OUT=$(parted -sm "${IMG_FILE}" unit b print)
+BOOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^1:' | cut -d':' -f 2 | tr -d B)
+BOOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^1:' | cut -d':' -f 4 | tr -d B)
 
-ROOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^ 2'| xargs echo -n \
-| cut -d" " -f 2 | tr -d B)
-ROOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^ 2'| xargs echo -n \
-| cut -d" " -f 4 | tr -d B)
+ROOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^2:' | cut -d':' -f 2 | tr -d B)
+ROOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^2:' | cut -d':' -f 4 | tr -d B)
 
 BOOT_DEV=$(losetup --show -f -o "${BOOT_OFFSET}" --sizelimit "${BOOT_LENGTH}" "${IMG_FILE}")
 ROOT_DEV=$(losetup --show -f -o "${ROOT_OFFSET}" --sizelimit "${ROOT_LENGTH}" "${IMG_FILE}")
@@ -66,4 +62,5 @@ mount -v "$ROOT_DEV" "${ROOTFS_DIR}" -t ext4
 mkdir -p "${ROOTFS_DIR}/boot"
 mount -v "$BOOT_DEV" "${ROOTFS_DIR}/boot" -t vfat
 
-rsync -aHAXx --exclude var/cache/apt/archives "${EXPORT_ROOTFS_DIR}/" "${ROOTFS_DIR}/"
+rsync -aHAXx --exclude /var/cache/apt/archives --exclude /boot "${EXPORT_ROOTFS_DIR}/" "${ROOTFS_DIR}/"
+rsync -rtx "${EXPORT_ROOTFS_DIR}/boot/" "${ROOTFS_DIR}/boot/"

export-noobs/00-release/00-run.sh

@@ -10,17 +10,23 @@ install -v		files/release_notes.txt		"${NOOBS_DIR}/"
 
 tar -v -c -C		files/marketing			-f "${NOOBS_DIR}/marketing.tar" .
 
+BOOT_SHASUM="$(sha256sum "${NOOBS_DIR}/boot.tar.xz" | cut -f1 -d' ')"
+ROOT_SHASUM="$(sha256sum "${NOOBS_DIR}/root.tar.xz" | cut -f1 -d' ')"
+
 BOOT_SIZE="$(xz --robot -l "${NOOBS_DIR}/boot.tar.xz"  | grep totals | cut -f 5)"
 ROOT_SIZE="$(xz --robot -l "${NOOBS_DIR}/root.tar.xz"  | grep totals | cut -f 5)"
 
 BOOT_SIZE="$(( BOOT_SIZE / 1024 / 1024 + 1))"
 ROOT_SIZE="$(( ROOT_SIZE / 1024 / 1024 + 1))"
 
-BOOT_NOM="$(( BOOT_SIZE * 3 ))"
+BOOT_NOM="256"
 ROOT_NOM="$(( ROOT_SIZE + 400 ))"
 
 mv "${NOOBS_DIR}/OS.png" "${NOOBS_DIR}/${NOOBS_NAME// /_}.png"
 
+sed "${NOOBS_DIR}/partitions.json" -i -e "s|BOOT_SHASUM|${BOOT_SHASUM}|"
+sed "${NOOBS_DIR}/partitions.json" -i -e "s|ROOT_SHASUM|${ROOT_SHASUM}|"
+
 sed "${NOOBS_DIR}/partitions.json" -i -e "s|BOOT_SIZE|${BOOT_SIZE}|"
 sed "${NOOBS_DIR}/partitions.json" -i -e "s|ROOT_SIZE|${ROOT_SIZE}|"
 

export-noobs/00-release/files/os.json

@@ -1,7 +1,7 @@
 {
     "description": "NOOBS_DESCRIPTION",
     "feature_level": 35120124,
-    "kernel": "4.14",
+    "kernel": "4.19",
     "name": "NOOBS_NAME",
     "password": "raspberry",
     "release_date": "UNRELEASED",
@@ -11,9 +11,10 @@
         "Pi 2",
         "Pi Zero",
         "Pi 3",
-        "Pi Compute Module 3"
+        "Pi Compute Module 3",
+        "Pi 4"
     ],
     "url": "http://www.raspbian.org/",
     "username": "pi",
-    "version": "stretch"
+    "version": "buster"
 }

export-noobs/00-release/files/partition_setup.sh

@@ -1,7 +1,9 @@
 #!/bin/sh
+#supports_backup in PINN
 
 set -ex
 
+# shellcheck disable=SC2154
 if [ -z "$part1" ] || [ -z "$part2" ]; then
   printf "Error: missing environment variable part1 or part2\n" 1>&2
   exit 1
@@ -13,23 +15,31 @@ mount "$part1" /tmp/1
 mount "$part2" /tmp/2
 
 sed /tmp/1/cmdline.txt -i -e "s|root=[^ ]*|root=${part2}|"
-sed /tmp/2/etc/fstab -i -e "s|^.* / |${part2}  / |"
-sed /tmp/2/etc/fstab -i -e "s|^.* /boot |${part1}  /boot |"
+sed /tmp/2/etc/fstab -i -e "s|^[^#].* / |${part2}  / |"
+sed /tmp/2/etc/fstab -i -e "s|^[^#].* /boot |${part1}  /boot |"
 
-if [ -f /mnt/ssh ]; then
-  cp /mnt/ssh /tmp/1/
-fi
+# shellcheck disable=SC2154
+if [ -z "$restore" ]; then
+  if [ -f /mnt/ssh ]; then
+    cp /mnt/ssh /tmp/1/
+  fi
 
-if [ -f /mnt/ssh.txt ]; then
-  cp /mnt/ssh.txt /tmp/1/
-fi
+  if [ -f /mnt/ssh.txt ]; then
+    cp /mnt/ssh.txt /tmp/1/
+  fi
 
-if [ -f /settings/wpa_supplicant.conf ]; then
-  cp /settings/wpa_supplicant.conf /tmp/1/
-fi
+  if [ -f /settings/wpa_supplicant.conf ]; then
+    cp /settings/wpa_supplicant.conf /tmp/1/
+  fi
 
-if ! grep -q resize /proc/cmdline; then
-  sed -i 's| init=/usr/lib/raspi-config/init_resize.sh||;s| quiet||2g' /tmp/1/cmdline.txt
+  if ! grep -q resize /proc/cmdline; then
+    if ! grep -q splash /tmp/1/cmdline.txt; then
+      sed -i "s| quiet||g" /tmp/1/cmdline.txt
+    fi
+    sed -i 's| init=/usr/lib/raspi-config/init_resize.sh||' /tmp/1/cmdline.txt
+  else
+    sed -i '1 s|.*|& sdhci.debug_quirks2=4|' /tmp/1/cmdline.txt
+  fi
 fi
 
 umount /tmp/1

export-noobs/00-release/files/partitions.json

@@ -6,7 +6,8 @@
             "mkfs_options": "-F 32",
             "partition_size_nominal": BOOT_NOM,
             "uncompressed_tarball_size": BOOT_SIZE,
-            "want_maximised": false
+            "want_maximised": false,
+            "sha256sum": "BOOT_SHASUM"
         },
         {
             "filesystem_type": "ext4",
@@ -14,7 +15,8 @@
             "mkfs_options": "-O ^huge_file",
             "partition_size_nominal": ROOT_NOM,
             "uncompressed_tarball_size": ROOT_SIZE,
-            "want_maximised": true
+            "want_maximised": true,
+            "sha256sum": "ROOT_SHASUM"
         }
     ]
 }

export-noobs/00-release/files/release_notes.txt

@@ -1,5 +1,22 @@
 UNRELEASED:
   *
+2019-04-08:
+  * Chromium browser updated to version 72
+  * VLC media player updated to version 3.0.6
+  * RealVNC Server updated to version 6.4.0
+  * Flash player updated to version 32.0.0.156
+  * Performance improvements to SDL library
+  * Performance improvements to pixman library
+  * Option to set display underscan added to startup wizard
+  * Mounted external drives now displayed on desktop by default
+  * Network plugin modified for improved compatibility with wpa_passphrase
+  * SD Card Copier tweaks to reduce copy failures
+  * Various minor bug fixes and appearance tweaks
+  * Added ethtool
+  * Added rng-tools
+  * Add PINN restore support
+  * Linux kernel 4.14.98
+  * Raspberry Pi firmware f8939644f7bd3065068787f1f92b3f3c79cf3de9
 2018-11-13:
   * Two versions of image created - "base" image has no optional software packages included; "full" image has all optional packages
     - Removed from "base" image - LibreOffice, Thonny, Scratch, Scratch 2, Sonic Pi, Minecraft, Python Games, SmartSim, SenseHAT Emulator

export-noobs/prerun.sh

@@ -1,24 +1,20 @@
 #!/bin/bash -e
 
-IMG_FILE="${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.img"
+IMG_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.img"
 NOOBS_DIR="${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}"
 unmount_image "${IMG_FILE}"
 
 mkdir -p "${STAGE_WORK_DIR}"
-cp "${WORK_DIR}/export-image/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}.img" "${STAGE_WORK_DIR}/"
+cp "${WORK_DIR}/export-image/${IMG_FILENAME}${IMG_SUFFIX}.img" "${STAGE_WORK_DIR}/"
 
-rm -rf "${STAGE_WORK_DIR}/${IMG_DATE}-${IMG_NAME}${IMG_SUFFIX}"
+rm -rf "${NOOBS_DIR}"
 
-PARTED_OUT=$(parted -s "${IMG_FILE}" unit b print)
-BOOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^ 1'| xargs echo -n \
-| cut -d" " -f 2 | tr -d B)
-BOOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^ 1'| xargs echo -n \
-| cut -d" " -f 4 | tr -d B)
+PARTED_OUT=$(parted -sm "${IMG_FILE}" unit b print)
+BOOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^1:' | cut -d':' -f 2 | tr -d B)
+BOOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^1:' | cut -d':' -f 4 | tr -d B)
 
-ROOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^ 2'| xargs echo -n \
-| cut -d" " -f 2 | tr -d B)
-ROOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^ 2'| xargs echo -n \
-| cut -d" " -f 4 | tr -d B)
+ROOT_OFFSET=$(echo "$PARTED_OUT" | grep -e '^2:' | cut -d':' -f 2 | tr -d B)
+ROOT_LENGTH=$(echo "$PARTED_OUT" | grep -e '^2:' | cut -d':' -f 4 | tr -d B)
 
 BOOT_DEV=$(losetup --show -f -o "${BOOT_OFFSET}" --sizelimit "${BOOT_LENGTH}" "${IMG_FILE}")
 ROOT_DEV=$(losetup --show -f -o "${ROOT_OFFSET}" --sizelimit "${ROOT_LENGTH}" "${IMG_FILE}")
@@ -33,8 +29,8 @@ mount "$BOOT_DEV" "${STAGE_WORK_DIR}/rootfs/boot"
 
 ln -sv "/lib/systemd/system/apply_noobs_os_config.service" "$ROOTFS_DIR/etc/systemd/system/multi-user.target.wants/apply_noobs_os_config.service"
 
-bsdtar --numeric-owner --format gnutar --use-compress-program pxz -C "${STAGE_WORK_DIR}/rootfs/boot" -cpf "${NOOBS_DIR}/boot.tar.xz" .
+bsdtar --numeric-owner --format gnutar -C "${STAGE_WORK_DIR}/rootfs/boot" -cpf - . | xz -T0 > "${NOOBS_DIR}/boot.tar.xz"
 umount "${STAGE_WORK_DIR}/rootfs/boot"
-bsdtar --numeric-owner --format gnutar --use-compress-program pxz -C "${STAGE_WORK_DIR}/rootfs" --one-file-system -cpf "${NOOBS_DIR}/root.tar.xz" .
+bsdtar --numeric-owner --format gnutar -C "${STAGE_WORK_DIR}/rootfs" --one-file-system -cpf - . | xz -T0 > "${NOOBS_DIR}/root.tar.xz"
 
 unmount_image "${IMG_FILE}"

scripts/common

@@ -4,21 +4,22 @@ log (){
 export -f log
 
 bootstrap(){
-	local ARCH
-	ARCH=$(dpkg --print-architecture)
+	local BOOTSTRAP_CMD=debootstrap
+	local BOOTSTRAP_ARGS=()
 
 	export http_proxy=${APT_PROXY}
 
-	if [ "$ARCH" !=  "armhf" ]; then
-		local BOOTSTRAP_CMD=qemu-debootstrap
-	else
-		local BOOTSTRAP_CMD=debootstrap
+	if [ "$(dpkg --print-architecture)" !=  "armhf" ] && [ "$(dpkg --print-architecture)" !=  "aarch64" ]; then
+		BOOTSTRAP_CMD=qemu-debootstrap
 	fi
 
-	capsh --drop=cap_setfcap -- "${BOOTSTRAP_CMD}" --components=main,contrib,non-free \
-		--arch armhf \
-		--keyring "${STAGE_DIR}/files/raspberrypi.gpg" \
-		"$1" "$2" "$3" || true
+	BOOTSTRAP_ARGS+=(--arch armhf)
+	BOOTSTRAP_ARGS+=(--components "main,contrib,non-free")
+	BOOTSTRAP_ARGS+=(--keyring "${STAGE_DIR}/files/raspberrypi.gpg")
+	BOOTSTRAP_ARGS+=("$@")
+
+	setarch linux32 capsh --drop=cap_setfcap -- "${BOOTSTRAP_CMD}" "${BOOTSTRAP_ARGS[@]}" || true
+
 	if [ -d "$2/debootstrap" ]; then
 		rmdir "$2/debootstrap"
 	fi
@@ -56,7 +57,7 @@ unmount_image(){
 	sync
 	sleep 1
 	local LOOP_DEVICES
-	LOOP_DEVICES=$(losetup -j "${1}" | cut -f1 -d':')
+	LOOP_DEVICES=$(losetup --list | grep "$(basename "${1}")" | cut -f1 -d' ')
 	for LOOP_DEV in ${LOOP_DEVICES}; do
 		if [ -n "${LOOP_DEV}" ]; then
 			local MOUNTED_DIR
@@ -88,14 +89,14 @@ on_chroot() {
 		mount --bind /sys "${ROOTFS_DIR}/sys"
 	fi
 
-	capsh --drop=cap_setfcap "--chroot=${ROOTFS_DIR}/" -- -e "$@"
+	setarch linux32 capsh --drop=cap_setfcap "--chroot=${ROOTFS_DIR}/" -- -e "$@"
 }
 export -f on_chroot
 
 update_issue() {
 	local GIT_HASH
 	GIT_HASH=$(git rev-parse HEAD)
-	echo -e "Raspberry Pi reference ${IMG_DATE}\nGenerated using pi-gen, https://github.com/RPi-Distro/pi-gen, ${GIT_HASH}, ${1}" > "${ROOTFS_DIR}/etc/rpi-issue"
+	echo -e "Raspberry Pi reference ${IMG_DATE}\nGenerated using ${PI_GEN}, ${PI_GEN_REPO}, ${GIT_HASH}, ${1}" > "${ROOTFS_DIR}/etc/rpi-issue"
 }
 export -f update_issue
 

scripts/dependencies_check

@@ -27,4 +27,12 @@ dependencies_check()
 		echo "$missing"
 		false
 	fi
+
+
+	if ! grep -q "/proc/sys/fs/binfmt_misc" /proc/mounts; then
+		echo "Module binfmt_misc not loaded in host"
+		echo "Please run:"
+		echo "  sudo modprobe binfmt_misc"
+		exit 1
+	fi
 }

stage0/00-configure-apt/files/raspi.list

@@ -1,3 +1,3 @@
-deb http://archive.raspberrypi.org/debian/ stretch main ui staging
+deb http://archive.raspberrypi.org/debian/ buster main
 # Uncomment line below then 'apt-get update' to enable 'apt-get source'
-#deb-src http://archive.raspberrypi.org/debian/ stretch main ui
+#deb-src http://archive.raspberrypi.org/debian/ buster main

stage0/00-configure-apt/files/sources.list

@@ -1,3 +1,3 @@
-deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
+deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
 # Uncomment line below then 'apt-get update' to enable 'apt-get source'
-#deb-src http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
+#deb-src http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi

stage0/prerun.sh

@@ -1,5 +1,5 @@
 #!/bin/bash -e
 
 if [ ! -d "${ROOTFS_DIR}" ]; then
-	bootstrap stretch "${ROOTFS_DIR}" http://raspbian.raspberrypi.org/raspbian/
+	bootstrap buster "${ROOTFS_DIR}" http://raspbian.raspberrypi.org/raspbian/
 fi

stage1/00-boot-files/files/config.txt

@@ -54,3 +54,11 @@
 
 # Enable audio (loads snd_bcm2835)
 dtparam=audio=on
+
+[pi4]
+# Enable DRM VC4 V3D driver on top of the dispmanx display stack
+dtoverlay=vc4-fkms-v3d
+max_framebuffers=2
+
+[all]
+#dtoverlay=vc4-fkms-v3d

stage1/01-sys-tweaks/00-run.sh

@@ -5,10 +5,10 @@ install -m 644 files/noclear.conf "${ROOTFS_DIR}/etc/systemd/system/[email protected]
 install -v -m 644 files/fstab "${ROOTFS_DIR}/etc/fstab"
 
 on_chroot << EOF
-if ! id -u pi >/dev/null 2>&1; then
-	adduser --disabled-password --gecos "" pi
+if ! id -u ${FIRST_USER_NAME} >/dev/null 2>&1; then
+	adduser --disabled-password --gecos "" ${FIRST_USER_NAME}
 fi
-echo "pi:raspberry" | chpasswd
+echo "${FIRST_USER_NAME}:${FIRST_USER_PASS}" | chpasswd
 echo "root:root" | chpasswd
 EOF
 

stage2/00-copies-and-fills/02-run.sh

@@ -0,0 +1,3 @@
+#!/bin/bash -e
+
+mv "${ROOTFS_DIR}/etc/ld.so.preload" "${ROOTFS_DIR}/etc/ld.so.preload.disabled"

stage2/01-sys-tweaks/00-packages

@@ -23,3 +23,5 @@ htop
 man-db
 policykit-1
 ssh-import-id
+rng-tools
+ethtool

stage2/01-sys-tweaks/01-run.sh

@@ -15,7 +15,11 @@ on_chroot << EOF
 systemctl disable hwclock.sh
 systemctl disable nfs-common
 systemctl disable rpcbind
-systemctl disable ssh
+if [ "${ENABLE_SSH}" == "1" ]; then
+	systemctl enable ssh
+else
+	systemctl disable ssh
+fi
 systemctl enable regenerate_ssh_host_keys
 EOF
 
@@ -32,12 +36,12 @@ systemctl enable resize2fs_once
 EOF
 fi
 
-on_chroot << \EOF
+on_chroot <<EOF
 for GRP in input spi i2c gpio; do
-	groupadd -f -r "$GRP"
+	groupadd -f -r "\$GRP"
 done
 for GRP in adm dialout cdrom audio users sudo video games plugdev input gpio spi i2c netdev; do
-  adduser pi $GRP
+  adduser $FIRST_USER_NAME \$GRP
 done
 EOF
 

stage2/02-net-tweaks/01-run.sh

@@ -6,3 +6,17 @@ install -v -m 644 files/wait.conf		"${ROOTFS_DIR}/etc/systemd/system/dhcpcd.serv
 install -v -d					"${ROOTFS_DIR}/etc/wpa_supplicant"
 install -v -m 600 files/wpa_supplicant.conf	"${ROOTFS_DIR}/etc/wpa_supplicant/"
 
+if [ -v WPA_COUNTRY ]; then
+	echo "country=${WPA_COUNTRY}" >> "${ROOTFS_DIR}/etc/wpa_supplicant/wpa_supplicant.conf"
+fi
+
+if [ -v WPA_ESSID ] && [ -v WPA_PASSWORD ]; then
+on_chroot <<EOF
+wpa_passphrase "${WPA_ESSID}" "${WPA_PASSWORD}" >> "/etc/wpa_supplicant/wpa_supplicant.conf"
+EOF
+fi
+
+# Disable wifi on 5GHz models
+mkdir -p "${ROOTFS_DIR}/var/lib/systemd/rfkill/"
+echo 1 > "${ROOTFS_DIR}/var/lib/systemd/rfkill/platform-3f300000.mmc:wlan"
+echo 1 > "${ROOTFS_DIR}/var/lib/systemd/rfkill/platform-fe300000.mmc:wlan"

stage3/00-install-packages/00-packages

@@ -12,3 +12,4 @@ gldriver-test
 fonts-droid-fallback
 fonts-liberation2
 obconf
+arandr

stage3/00-install-packages/00-packages-nr

@@ -1,6 +1,6 @@
 xserver-xorg-video-fbdev xserver-xorg xinit xserver-xorg-video-fbturbo
 epiphany-browser
-lxde lxtask menu-xdg gksu
-netsurf-gtk zenity xdg-utils
+lxde lxtask menu-xdg
+zenity xdg-utils
 gvfs-backends gvfs-fuse
 lightdm gnome-themes-standard-data gnome-icon-theme

stage4/00-install-packages/00-packages

@@ -1,6 +1,5 @@
-java-common oracle-java8-jdk
-python idle python3-pygame python-pygame python-tk
-python3 idle3 python3-tk
+python python3-pygame python-pygame python-tk
+python3 python3-tk python3-thonny
 python3-pgzero
 python-serial python3-serial
 python-picamera python3-picamera
@@ -11,7 +10,7 @@ python3-numpy
 pypy
 alacarte rc-gui sense-hat
 tree
-libgl1-mesa-dri libgles1-mesa libgles2-mesa xcompmgr
+libgl1-mesa-dri libgles1 libgles2-mesa xcompmgr
 geany
 piclone
 wiringpi pigpio python-pigpio python3-pigpio raspi-gpio python-gpiozero python3-gpiozero python3-rpi.gpio
@@ -23,5 +22,5 @@ python-picraft python3-picraft
 pprompt
 piwiz
 rp-prefapps
-libav-tools
+ffmpeg
 vlc

stage4/00-install-packages/00-packages-nr

@@ -1,3 +1,2 @@
-timidity
 pi-package
 realvnc-vnc-server

stage4/01-console-autologin/00-run.sh

@@ -1,4 +1,5 @@
 #!/bin/bash -e
 
-ln -sf /etc/systemd/system/[email protected] \
-	"${ROOTFS_DIR}/etc/systemd/system/getty.target.wants/[email protected]"
+on_chroot << EOF
+	SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_boot_behaviour B4
+EOF

stage4/02-extras/00-run.sh

@@ -1,7 +1,7 @@
 #!/bin/bash -e
 
 #Alacarte fixes
-install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/pi/.local"
-install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/pi/.local/share"
-install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/pi/.local/share/applications"
-install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/pi/.local/share/desktop-directories"
+install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.local"
+install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.local/share"
+install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.local/share/applications"
+install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/.local/share/desktop-directories"

stage4/03-magpi/00-run.sh

@@ -11,6 +11,5 @@ fi
 
 file "files/$magpi_latest" | grep -q "PDF document"
 
-install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/pi/MagPi"
-install -v -o 1000 -g 1000 -m 644 "files/$magpi_latest" "${ROOTFS_DIR}/home/pi/MagPi/"
-
+install -v -o 1000 -g 1000 -d "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/MagPi"
+install -v -o 1000 -g 1000 -m 644 "files/$magpi_latest" "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/MagPi/"

stage4/04-enable-xcompmgr/00-run.sh

@@ -0,0 +1,5 @@
+#!/bin/bash -e
+
+on_chroot << EOF
+	raspi-config nonint do_xcompmgr 0
+EOF

stage5/00-install-extras/00-packages

@@ -1,4 +1,4 @@
-python3-thonny
+mu-editor
 sonic-pi
 scratch nuscratch scratch2
 smartsim
@@ -6,9 +6,8 @@ smartsim
 minecraft-pi python-minecraftpi
 python-sense-emu sense-emu-tools python-sense-emu-doc
 
-wolfram-engine
 claws-mail
-greenfoot bluej
+greenfoot-unbundled bluej
 nodered
 realvnc-vnc-viewer