Working pi-gen with nodejs and other packages.

build.sh

@@ -1,5 +1,6 @@
 #!/bin/bash -e
 
+IMG_NAME='Raspbian'
 run_sub_stage()
 {
 	log "Begin ${SUB_STAGE_DIR}"

stage2/EXPORT_IMAGE

@@ -1 +0,0 @@
-IMG_SUFFIX="-lite"

stage2/EXPORT_NOOBS

@@ -1,2 +0,0 @@
-NOOBS_NAME="Raspbian Lite"
-NOOBS_DESCRIPTION="A port of Debian Stretch for the Raspberry Pi (minimal version)"

stage3/02-wpantund/00-packages

@@ -0,0 +1,4 @@
+dbus libreadline5
+#gcc g++ libdbus-1-dev libboost-dev libreadline-dev
+#libtool autoconf autoconf-archive
+#make

stage3/02-wpantund/00-run.sh

@@ -0,0 +1,21 @@
+#!/bin/bash -e
+
+#install -m 755 files/wpantund   ${ROOTFS_DIR}/usr/sbin/
+#install -m 755 files/wpanctl    ${ROOTFS_DIR}/usr/bin/
+#install -d files/etc ${ROOTFS_DIR}/
+#install -d files/usr ${ROOTFS_DIR}/
+
+install -d ${ROOTFS_DIR}/usr/local/bin/ ${ROOTFS_DIR}/usr/local/sbin/ ${ROOTFS_DIR}/usr/local/libexec/wpantund/
+install -m 755 files/usr/local/bin/wpanctl                    ${ROOTFS_DIR}/usr/local/bin/
+install -m 755 files/usr/local/sbin/wpantund                  ${ROOTFS_DIR}/usr/local/sbin/
+install -m 755 files/usr/local/libexec/wpantund/ncp-spinel.la ${ROOTFS_DIR}/usr/local/libexec/wpantund/
+install -m 755 files/usr/local/libexec/wpantund/ncp-dummy.so  ${ROOTFS_DIR}/usr/local/libexec/wpantund/
+install -m 755 files/usr/local/libexec/wpantund/ncp-dummy.la  ${ROOTFS_DIR}/usr/local/libexec/wpantund/
+install -m 755 files/usr/local/libexec/wpantund/ncp-spinel.so ${ROOTFS_DIR}/usr/local/libexec/wpantund/
+install -m 644 files/etc/dbus-1/system.d/wpantund.conf        ${ROOTFS_DIR}/etc/dbus-1/system.d/
+install -m 644 files/etc/wpantund.conf                        ${ROOTFS_DIR}/etc/
+install -m 644 files/etc/systemd/system/wpantund.service      ${ROOTFS_DIR}/etc/systemd/system/
+
+on_chroot << EOF
+  systemctl disable wpantund
+EOF

stage3/02-wpantund/files/etc/dbus-1/system.d/wpantund.conf

@@ -0,0 +1,44 @@
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+    <policy user="root">
+        <allow own="org.wpantund"/>
+        <allow own="org.wpantund.wpanctl"/>
+
+        <allow send_interface="org.wpantund.Join"/>
+        <allow send_interface="org.wpantund.Form"/>
+        <allow send_interface="org.wpantund.Leave"/>
+        <allow send_interface="org.wpantund.Attach"/>
+        <allow send_interface="org.wpantund.Status"/>
+        <allow send_interface="org.wpantund.Reset"/>
+        <allow send_interface="org.wpantund.NetScanStart"/>
+        <allow send_interface="org.wpantund.NetScanStop"/>
+        <allow send_interface="org.wpantund.List"/>
+
+
+        <!-- Deprecated -->
+        <allow own="com.nestlabs.WPANTunnelDriver"/>
+        <allow own="com.nestlabs.WPANTunnelDriver.wpanctl"/>
+        <allow send_destination="com.nestlabs.WPANTunnelDriver"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.Join"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.Form"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.Leave"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.Resume"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.Scan"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.PermitJoin"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.Status"/>
+        <allow send_interface="com.nestlabs.WPANTunnelDriver.List"/>
+    </policy>
+    <policy at_console="true">
+        <allow send_destination="org.wpantund"/>
+
+        <!-- Deprecated -->
+        <allow send_destination="com.nestlabs.WPANTunnelDriver"/>
+    </policy>
+    <policy context="default">
+        <deny send_destination="org.wpantund"/>
+
+        <!-- Deprecated -->
+        <deny send_destination="com.nestlabs.WPANTunnelDriver"/>
+    </policy>
+</busconfig>

stage3/02-wpantund/files/etc/systemd/system/wpantund.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=Sub-GHz network daemon
+After=network.target
+
+[Service]
+ExecStart=/usr/local/sbin/wpantund -o NCPSocketName /dev/ttyACM0 -o WPANInterfaceName wpan0
+StandardOutput=null
+
+[Install]
+Alias=wpantund

stage3/02-wpantund/files/etc/wpantund.conf

@@ -0,0 +1,154 @@
+# Example wpantund configuration file
+#
+
+# The desired name of the network interface (not supported on all platforms)
+# Default value is `wpan0`.
+#
+#Config:TUN:InterfaceName wpan0
+
+# Path to serial port used to communicate with the NCP.
+# Has special meaning when prefixed with `system:` or `serial:`.
+# If the path is an IPv4 address/port, it will use a TCP socket.
+#
+#Config:NCP:SocketPath "/dev/tty.usbmodem1234"
+#Config:NCP:SocketPath "127.0.0.1:4901"
+#Config:NCP:SocketPath "system:/usr/local/sbin/spi-server -p - -s /dev/spidev2.0"
+#Config:NCP:SocketPath "serial:/dev/ttyO1,raw,b115200,crtscts=1"
+
+# The desired NCP driver to use.
+# Default value is `spinel`.
+#
+#Config:NCP:DriverName spinel
+
+# Describes what type of serial reliability layer should be used, if any.
+# Generally this is set appropriately automatically, so you usually
+# don't need to bother setting this.
+#
+# Optional. Default value is automatic.
+#
+#Config:NCP:ReliabilityLayer libsoot
+
+# The default transmit power of the NCP, measured in dBm
+# (0 dBm is one milliwatt, can be negative)
+#
+# Optional. Default value is NCP-specific.
+#
+#NCP:TXPower 0
+
+# The CCA threshold value, measured in dBm
+#
+# Optional. Default value is NCP-specific.
+#
+#NCP:CCAThreshold -70
+
+# Path to reset pin. This socket is opened and values sent to it
+# based on the desired reset state. wpantund sends `0\n` to
+# assert the reset pin and sends `1\n` to deassert the reset pin.
+# Can be used with the same `system:` and `serial:` prefixes defined
+# above to handle special cases. On linux, you would generally
+# set this to the `value` file of the RESET GPIO.
+#
+# Optional. If not set, only software resets will be possible.
+#
+#Config:NCP:HardResetPath "/sys/class/gpio/gpio49/value"
+
+# Path to power pin. The semantics are similar to those for
+# `NCPHardResetPath` above, except that wpantund sends `0\n` to
+# indicate that the NCP power should be disabled and `1\n` to
+# indicate that the NCP power should be enabled.
+#
+# Optional. If not set, only software induced sleep will be used
+# for low-power states.
+#
+#Config:NCP:PowerPath "/sys/class/gpio/gpio11/value"
+
+# Syslog mask adjustment. This property is a set of
+# boolean masks for manipulating the bitmask used by `syslog()`.
+# The string can contain the following words that represent
+# the associated bit. The presence of the word in the string
+# indicates that that bit should be set. Prefixing the word with
+# a `-` (dash/minus) indicates that that bit should be cleared.
+# The following keywords are supported:
+#
+# * `all` (All log levels)
+# * `emerg`
+# * `alert`
+# * `crit`
+# * `err`
+# * `warn`
+# * `notice`
+# * `info`
+# * `debug`
+#
+# So, for example, to get all log messages except debugging
+# messages, you would use `all -debug`.
+#
+# Optional. The default value for non-debug builds is
+# `all -info -debug`.
+#
+#Daemon:SyslogMask "all -info -debug"
+
+# Drop root privileges to the given user (and that user's group)
+# after setting up all network interfaces and socket connections.
+# Doing this helps mitigate the implications of security exploits,
+# but may interfere with how hard resets are performed for certain
+# NCPs.
+#
+# Optional. Default value is empty, which means that privileges
+# are not dropped.
+#
+#Config:Daemon:PrivDropToUser "nobody"
+
+# Call `chroot()` to change the root directory to the directory
+# indicated, after setting up all network interfaces and socket
+# connections, but before privileges are dropped for `PrivDropToUser`
+# (if set). Doing this helps mitigate the implications of security
+# exploits, but may interfere with how hard resets are performed
+# for certain NCPs.
+#
+# Optional. Default value is empty, which means that `chroot` is
+# not called.
+#
+#Config:Daemon:Chroot "/var/empty"
+
+# Automatic firmware update enable/disable. This flag determines
+# if the automatic firmware update mechanism (which uses the
+# properties `FirmwareCheckCommand` and `FirmwareUpgradeCommand`,
+# described below) is enabled or disabled. This flag is used
+# when the driver determines that it doesn't know how to talk to
+# the version of the firmware that is running on the NCP.
+#
+# If set to true, the NCP association state will then be set to
+# `upgrading` and the firmware update process will begin. If set to
+# false, the NCP association state will change to `fault`.
+#
+# This property may be changed at runtime to more strictly
+# control when a firmware update is allowed to take place.
+#
+# Optional. The default value is false---which will prevent
+# automatic wpantund-driven firmware updates.
+#
+#Daemon:AutoFirmwareUpdate true
+
+# Firmware update check command. This command is executed with
+# the retrieved version string of the NCP appended as the last
+# argument. If the command returns `0`, a firmware update is
+# necessary. This configuration option is fairly useless without
+# the `FirmwareUpgradeCommand` option also being set, defined below.
+#
+# Optional. If left blank, wpantund-driven firmware updates will
+# be disabled.
+#
+#Config:NCP:FirmwareCheckCommand "test 'MyFunStack/1.0' !="
+#Config:NCP:FirmwareCheckCommand "/usr/local/sbin/zb-loader --is-update-required /usr/share/ncp-firmware/ip-modem-app.bin"
+
+# Firmware upgrade command. This is the command that is actually
+# executed that performs the firmware update. Before calling this
+# command, `wpantund` disconnects entirely from the NCP. While
+# this command is executing, the association state reported
+# for this interface will be `upgrading`.
+#
+# Optional. If left blank, wpantund-driven firmware updates will
+# be disabled.
+#
+#Config:NCP:FirmwareUpgradeCommand "/usr/local/sbin/zb-loader /dev/ttyO1 --app-easyload /usr/share/ncp-firmware/ip-modem-app.bin"

stage3/02-wpantund/files/usr/local/libexec/wpantund/ncp-dummy.la

@@ -0,0 +1,41 @@
+# ncp-dummy.la - a libtool library file
+# Generated by libtool (GNU libtool) 2.4.2 Debian-2.4.2-1.11
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='ncp-dummy.so'
+
+# Names of this library.
+library_names='ncp-dummy.so ncp-dummy.so ncp-dummy.so'
+
+# The name of the static archive.
+old_library=''
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags=''
+
+# Libraries that this one depends upon.
+dependency_libs=' -lutil'
+
+# Names of additional weak libraries provided by this library
+weak_library_names=''
+
+# Version information for ncp-dummy.
+current=0
+age=0
+revision=0
+
+# Is this an already installed library?
+installed=yes
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=yes
+
+# Files to dlopen/dlpreopen
+dlopen=''
+dlpreopen=''
+
+# Directory that this library needs to be installed in:
+libdir='/usr/local/libexec/wpantund'

stage3/02-wpantund/files/usr/local/libexec/wpantund/ncp-spinel.la

@@ -0,0 +1,41 @@
+# ncp-spinel.la - a libtool library file
+# Generated by libtool (GNU libtool) 2.4.2 Debian-2.4.2-1.11
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='ncp-spinel.so'
+
+# Names of this library.
+library_names='ncp-spinel.so ncp-spinel.so ncp-spinel.so'
+
+# The name of the static archive.
+old_library=''
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags=''
+
+# Libraries that this one depends upon.
+dependency_libs=' -lutil'
+
+# Names of additional weak libraries provided by this library
+weak_library_names=''
+
+# Version information for ncp-spinel.
+current=0
+age=0
+revision=0
+
+# Is this an already installed library?
+installed=yes
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=yes
+
+# Files to dlopen/dlpreopen
+dlopen=''
+dlpreopen=''
+
+# Directory that this library needs to be installed in:
+libdir='/usr/local/libexec/wpantund'

stage3/03-nodejs/00-run.sh

@@ -0,0 +1,143 @@
+#!/bin/bash -e
+
+BASE_DIR=$(pwd)
+
+
+########################
+# Install dependencies #
+########################
+#dpkg --add-architecture i386
+
+apt-get update
+apt-get install -y make python build-essential
+apt-get install -y curl
+apt-get install -y gcc-arm-linux-gnueabihf g++-arm-linux-gnueabihf
+#apt-get install -y gcc-multilib g++-multilib
+#apt-get install -y libc6-dev-i386
+
+#apt-get install -y libc6-dev
+
+apt-get --purge remove node
+apt-get --purge remove nodejs
+curl -sL https://deb.nodesource.com/setup_6.x | /bin/bash -e -
+apt-get install -y nodejs
+npm install -g npm@5.3.0
+#npm cache clean --force
+
+#ln -s /usr/include/asm-generic /usr/include/asm
+
+
+#################
+# Checkout node #
+#################
+NODE_BUILD_PATH=${BASE_DIR}/build/node
+if [ ! -d "$NODE_BUILD_PATH" ]; then
+  git clone https://github.com/nodejs/node.git $NODE_BUILD_PATH
+fi
+cd $NODE_BUILD_PATH
+git checkout v6.11.2
+
+
+#######################
+# Cross-build Node.js #
+#######################
+ 
+#export BASEDIR=$(pwd)
+#export STAGING_DIR=${BASEDIR}/staging_dir
+#export V8SOURCE=${BASEDIR}/v8m-rb
+export PREFIX=arm-linux-gnueabihf-
+export LIBPATH=${ROOTFS_DIR}/usr/lib/arm-linux-gnueabihf/
+export TARGET_PATH=${ROOTFS_DIR}
+
+# ARM cross-compile exports
+export CC=${PREFIX}gcc
+export CXX=${PREFIX}g++
+export AR=${PREFIX}ar
+export RANLIB=${PREFIX}ranlib
+export LINK=${PREFIX}g++
+export CPP="${PREFIX}gcc -E"
+export STRIP=${PREFIX}strip
+export OBJCOPY=${PREFIX}objcopy
+export LD=${PREFIX}g++
+export OBJDUMP=${PREFIX}objdump
+export NM=${PREFIX}nm
+export AS=${PREFIX}as
+export PS1="[${PREFIX}] \w$ "
+#export LDFLAGS='-Wl,-L'${LIBPATH}
+export LDFLAGS='-Wl,-rpath-link '${LIBPATH}
+ 
+export TARGET_ARCH="-march=armv7l"
+#export TARGET_TUNE="-mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -mthumb-interwork -mno-thumb"
+export CXX_TARGET_ARCH="-march-armv7l"
+
+export V8_TARGET_ARCH="-march-armv7l"
+export CXX_host="g++ -m32"
+export CC_host="gcc -m32" 
+export LINK_host="g++ -m32"
+
+ 
+make clean
+make distclean
+ 
+#./configure --prefix=${TARGET_PATH} --dest-cpu=arm --dest-os=linux --without-snapshot --with-arm-float-abi=hard --with-arm-fpu=vfpv3
+./configure --prefix=${TARGET_PATH} --dest-cpu=arm --dest-os=linux --without-snapshot --with-arm-float-abi=hard --with-arm-fpu=vfpv3 --without-intl
+
+#./configure --without-snapshot --dest-cpu=arm --dest-os=linux --with-arm-float-abi=softfp --with-intl=full-icu --download=all
+ 
+make snapshot=off -j4
+make install
+
+
+#########################
+# Install node packages #
+#########################
+cd ${BASE_DIR}
+
+echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+# WAR for node-gyp build
+#mkdir -p ${ROOTFS_DIR}/lib/node_modules/node-red/node_modules/bcrypt
+#chown -R $USER:$GROUP ${ROOTFS_DIR}/lib/node_modules/node-red/node_modules/bcrypt
+
+#mkdir -p ${ROOTFS_DIR}/lib/node_modules/node-red/node_modules/bcrypt/build
+#chown -R $USER:$GROUP ${ROOTFS_DIR}/lib/node_modules/node-red/node_modules/bcrypt/build
+
+#ls -la ${ROOTFS_DIR}/lib/node_modules/node-red/node_modules/bcrypt/build
+#ls -la ${ROOTFS_DIR}
+echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
+
+export npm_config_arch=arm
+export npm_config_nodedir=${NODE_BUILD_PATH}
+
+npm_install () {
+  npm install -g --prefix=${TARGET_PATH} --target_arch=arm --target_platform=linux "$1"
+}
+
+#npm --prefix=${TARGET_PATH} --target_arch=arm --target_platform=linux cache clean --force
+
+npm_install npm@5.3.0
+npm_install node-red
+npm_install coap
+npm_install node-red-dashboard
+
+# Running `npm_install repos/node-red-contrib-juliet` fails, this is a workaround
+cd repos/node-red-contrib-juliet
+npm install --target_arch=arm --target_platform=linux
+npm_install
+
+
+#######################################
+# Install WPAN service Node-RED flows #
+#######################################
+cd ${BASE_DIR}
+
+NODE_DIR=${ROOTFS_DIR}/home/pi/.node-red
+install -m 755 -d ${NODE_DIR}
+install -m 755 -d ${NODE_DIR}/scripts/
+install -m 644 -D files/flows_*.json    ${NODE_DIR}/
+install -m 755 -D files/*.sh            ${NODE_DIR}/scripts/
+install -m 755 -D files/usbreset        ${ROOTFS_DIR}/usr/sbin/
+
+on_chroot << EOF
+  chown -R pi:pi /home/pi/.node-red
+EOF
+

stage3/03-nodejs/01-run.sh

@@ -0,0 +1,14 @@
+#!/bin/bash -e
+
+export NODE_SERVICE_DIR=node-service
+
+git clone https://github.com/node-red/raspbian-deb-package.git ${NODE_SERVICE_DIR}
+
+install -m 644 ${NODE_SERVICE_DIR}/resources/nodered.service ${ROOTFS_DIR}/lib/systemd/system/
+install -m 755 ${NODE_SERVICE_DIR}/resources/node-red-start  ${ROOTFS_DIR}/usr/bin
+install -m 755 ${NODE_SERVICE_DIR}/resources/node-red-stop   ${ROOTFS_DIR}/usr/bin
+install -m 755 ${NODE_SERVICE_DIR}/resources/node-red-log    ${ROOTFS_DIR}/usr/bin
+
+on_chroot << EOF
+systemctl enable nodered
+EOF

stage3/03-nodejs/files/flows_raspberrypi_cred.json

@@ -0,0 +1 @@
+{"$":"f240ab1c9f66a39a3e45e7de7649ac74L9Q="}

stage3/03-nodejs/files/wpan_configure.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+XPANID=`cat /home/pi/.node-red/scripts/wpan_network_xpanid`
+NETWORK_KEY=`cat /home/pi/.node-red/scripts/wpan_network_key`
+NETWORK_NAME=`cat /home/pi/.node-red/scripts/wpan_network_name`
+
+wpanctl setprop Network:XPANID $XPANID
+wpanctl setprop Network:Key $NETWORK_KEY
+wpanctl form -c 11 $NETWORK_NAME

stage3/03-nodejs/files/wpan_new_configuration.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+CONFIG_ROOT=/home/pi/.node-red/scripts
+
+# Insecure /dev/urandom can be used xpanid and name
+XPANID=`head -c 64 /dev/urandom | sha256sum -b | head -c 16`
+NETWORK_NAME=RPi-`head -c 64 /dev/urandom | sha256sum -b | head -c 4`
+
+echo -n $XPANID > $CONFIG_ROOT/wpan_network_xpanid
+echo -n $NETWORK_NAME > $CONFIG_ROOT/wpan_network_name
+
+# Secure /dev/random MUST be used when generating network key
+head -c 64 /dev/random | sha256sum -b | head -c 32 > $CONFIG_ROOT/wpan_network_key

stage3/03-nodejs/files/wpan_reset_usb.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+USBNAME=STMicroelectronics
+LSUSB=$(lsusb | grep --ignore-case $USBNAME)
+FOLD="/dev/bus/usb/"$(echo $LSUSB | cut --delimiter=' ' --fields='2')"/"$(echo $LSUSB | cut --delimiter=' ' --fields='4' | tr --delete ":")
+echo $LSUSB
+echo "-----------"
+echo $FOLD
+usbreset $FOLD

stage3/03-nodejs/files/wpan_restart.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+ROOT_DIR=`dirname $0`
+
+$ROOT_DIR/wpan_reset_usb.sh
+sleep 1
+
+systemctl restart wpantund.service
+sleep 1
+
+$ROOT_DIR/wpan_configure.sh
+sleep 1
+
+wpanctl commissioner -e

stage3/03-nodejs/repos/node-red-contrib-juliet

@@ -0,0 +1 @@
+Subproject commit 1733029da8a9ac402c6204fb4c74d99f2eb71fe4

stage3/04-hwrng/00-packages

@@ -0,0 +1 @@
+rng-tools

stage3/04-hwrng/00-run-chroot.sh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+echo 'HRNGDEVICE=/dev/hwrng' | tee --append /etc/default/rng-tools
+
+systemctl enable rng-tools

stage3/EXPORT_IMAGE

@@ -0,0 +1 @@
+IMG_SUFFIX='-nodejs'

stage4/EXPORT_IMAGE

@@ -1 +0,0 @@
-IMG_SUFFIX="-4GB"

stage5/EXPORT_IMAGE

@@ -1 +0,0 @@
-IMG_SUFFIX=""

stage5/EXPORT_NOOBS

@@ -1,2 +0,0 @@
-NOOBS_NAME="Raspbian"
-NOOBS_DESCRIPTION="A port of Debian Stretch for the Raspberry Pi (full desktop version)"