From 90773a34ae8a196386093aa830decf25bec31016 Mon Sep 17 00:00:00 2001 From: Andrew Pattison <58046090+andrum99@users.noreply.github.com> Date: Wed, 8 Jan 2020 11:55:34 +0000 Subject: [PATCH] capitalise Raspberry Pi --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 04e1caa..73d4961 100644 --- a/README.md +++ b/README.md @@ -119,11 +119,11 @@ The following environment variables are supported: * `WPA_ESSID`, `WPA_PASSWORD` and `WPA_COUNTRY` (Default: unset) - If these are set, they are use to configure `wpa_supplicant.conf`, so that the raspberry pi can automatically connect to a wifi network on first boot. If `WPA_ESSID` is set and `WPA_PASSWORD` is unset an unprotected wifi network will be configured. If set, `WPA_PASSWORD` must be between 8 and 63 characters. + If these are set, they are use to configure `wpa_supplicant.conf`, so that the Raspberry Pi can automatically connect to a wifi network on first boot. If `WPA_ESSID` is set and `WPA_PASSWORD` is unset an unprotected wifi network will be configured. If set, `WPA_PASSWORD` must be between 8 and 63 characters. * `ENABLE_SSH` (Default: `0`) - Setting to `1` will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you RaspberryPi. + Setting to `1` will enable ssh server for remote log in. Note that if you are using a common password such as the defaults there is a high risk of attackers taking over you Raspberry Pi. * `STAGE_LIST` (Default: `stage*`)